Icom IC-M32 instruction manual Self check function SC, Battery voltage indicator bt

Page 27

DSelf check function “SC”

The self check function checks transceiver conditions by it- self, and informs you in case a problem is found. The follow- ing items are checked after the power is turned ON, then it switches to operation mode.

•Temperature : Outside of –25°C to +65°C; –13°F to +149°F (approx.)

•Connected battery voltage

•Water intrusion

Push

Self check OFF (default)

Self check ON

When error messages as shown below are displayed, see troubleshooting for advice. (p. 29)

Temperature error

Battery voltage error

Water intrusion error

SET MODE 7

DBattery voltage indicator “bt”

The voltage of the connected battery pack can be turned ON (displayed for 2 sec.) or OFF (non-displayed) after power is turned ON.

	Push
Battery voltage	Battery voltage	7
indication OFF	indication ON	7
(default)

21

Image 27

Contents IM32 Safety Training Information Case of Emergency Clean the Transceiver Thoroughly with FreshWord Definition Rwarning ForewordPrecaution Table of Contents Radio licenses Operating RulesPriorities PrivacySupplied Accessories and Attachments Supplied accessoriesAttachments To remove the battery pack Battery packFront, top and side panels Panel DescriptionPanel Description 0PTT Switch PTT0SUB Channel Readout Function display4SQUELCH Level Adjusting Indicator 1SQUELCH Level Indicator2VOLUME Level Indicator 3VOLUME Level Adjusting IndicatorChannel 9 Call channel Basic OperationChannel selection ChannelWeather channels S.A., International and Canadian channelsAdjusting the squelch level Adjusting the volume levelReceiving and transmitting Call channel programming Lock function Automatic backlightingMonitor function Normal Scan Scan OperationScan types Priority ScanStarting a scan Setting tag channelsDUALWATCH/TRI-WATCH Simulation DUALWATCH/TRI-WATCHDescription OperationSET Mode SET mode programmingSET mode operation Priority scan function Pr SET mode itemsBeep tone function bP Weather alert function ALDual/Tri-watch function dt Scan resume timer StMonitor switch action Sq Auto scan function ASPower save function PS Automatic backlighting bLLCD contrast selection LC Self check function SC Battery voltage indicator btSET Mode List Recycling information U.S.A. only Battery ChargingBattery charging Battery cautionCharging connections Optional battery caseAD-103 installation Optional battery chargersRapid charging with the BC-121N+AD-103 Rapid charging with the BC-119N+AD-103MB-87 contents Swivel Belt ClipTo attach To detach Problem Possible Cause Solution TroubleshootingUSA INT VHF Marine Channel ListSpecifications General ReceiverTransmitter Options Battery Case and PackPage Kamiminami, Hirano-ku, Osaka 547-0003, Japan