Graco 24J397, 24J395, 24K466, 24J392, 24J398, 24J396, 24J399, 24J394, 24J391 Equipment Misuse Hazard

Page 3

Warnings

WARNING

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

Do not operate the unit when fatigued or under the influence of drugs or alcohol.

Do not exceed the maximum working pressure or temperature rating of the lowest rated system compo- nent. See Technical Data in all equipment manuals.

Use fluids and solvents that are compatible with equipment wetted parts. See Technical Data in all equipment manuals. Read fluid and solvent manufacturer’s warnings. For complete information about your material, request MSDS from distributor or retailer.

Do not leave the work area while equipment is energized or under pressure.

Turn off all equipment and follow the Pressure Relief Procedure when equipment is not in use.

Check equipment daily. Repair or replace worn or damaged parts immediately with genuine manufac- turer’s replacement parts only.

Do not alter or modify equipment. Alterations or modifications may void agency approvals and create safety hazards.

Make sure all equipment is rated and approved for the environment in which you are using it.

Use equipment only for its intended purpose. Call your distributor for information.

Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.

Do not kink or over bend hoses or use hoses to pull equipment.

Keep children and animals away from work area.

Comply with all applicable safety regulations.

PERSONAL PROTECTIVE EQUIPMENT

Wear appropriate protective equipment when in the work area to help prevent serious injury, including eye injury, hearing loss, inhalation of toxic fumes, and burns. This protective equipment includes but is not lim- ited to:

Protective eye wear, and hearing protection.

Respirators, protective clothing, and gloves as recommended by the fluid and solvent manufacturer

3A2257C

3

Image 3
Contents Pressure Models Alarm Pump ModelSuction Models Gravity ModelsSkin Injection Hazard Equipment Misuse Hazard Mounting Pump Pressure Relief ProcedureSetup Gravity Fed Models FIG Suction Fed Models FIGPressure Fed Models FIG Alarm Pump Models FIGAdjusting the Pump Calculating Pints per Day Calculating Output CapacityMin Max SpecificationsInches Psi Bar MinProblem Cause Solution TroubleshootingSight Well Runs Dry MaintenanceSight Glass Replacement Kit Sight Well Fills With OilMetric Technical DataPump Dimensions Gravity Fed Pressure FedSuction Fed Alarm Pump Graco Information Graco Standard Warranty