La Crosse Technology WS-7054U instruction manual II. Time, Setting the Time

Page 10

II.TIME

Control Buttons

A.SETTING THE TIME

1.Press and hold the SET button for 1 second. “12h” will appear in the

TIME LCD.

2.Use the INDOOR button to select either 12h time or 24h time (12h is an AM—PM mode, and 24h is military time).

3.Press the SET button 2 times, “TIME” will flash in the upper left corner.

4.Press the INDOOR button to set the hours, and press the OUTDOOR button to set the minutes.

7

Image 10
Contents WS-7054U Wireless 433 MHz Temperature Station Table of Contents Using Multiple Remote Control Senders FCC DisclaimerInventory of Contents Quick Setup Battery cover Battery compartment Page Indoor Temperature Station Time LCD Indoor LCD Outdoor LCD Setting the Time II. TimePress the SET button to activate the clock IV. Features Indoor Minimum and Maximum Temperatures Outdoor Minimum and Maximum Temperatures Resetting the Minimum and Maximum Temperatures Indoor Outdoor VI. Reading the Temperature Trend VII. Mounting Remote Control SenderMounting with the Screws Mounting with Adhesive Tape Indoor Temperature Station Using the TABLE-STAND Wall MountingVIII. Using Multiple Remote Control Senders Page Setup of Multiple Units Page Viewing the Features of Multiple Remote Control Senders Page Troubleshooting Problem Solution AppearsPage Problem Persists Technology Maintenance and Care Instructions Specifications Recommended Operating TemperatureAccuracy Warranty Information Page Page Support@lacrossetechnology.com FCC Disclaimer