La Crosse Technology WS-7054U instruction manual Indoor Temperature Station

Page 8

B.INDOOR TEMPERATURE STATION

Note: After the batteries are installed, DO NOT press any buttons. This may interfere with the signals, causing temperatures to register incorrectly.

1.Remove the battery cover on the backside. To do this, push up and pull out.

Battery

Cover

5

Image 8

Contents WS-7054U Wireless 433 MHz Temperature Station Table of Contents Using Multiple Remote Control Senders FCC DisclaimerInventory of Contents Quick Setup Battery cover Battery compartment Page Indoor Temperature Station Time LCD Indoor LCD Outdoor LCD Setting the Time II. TimePress the SET button to activate the clock IV. Features Indoor Minimum and Maximum Temperatures Outdoor Minimum and Maximum Temperatures Resetting the Minimum and Maximum Temperatures Indoor Outdoor VI. Reading the Temperature Trend VII. Mounting Remote Control SenderMounting with the Screws Mounting with Adhesive Tape Indoor Temperature Station Using the TABLE-STAND Wall MountingVIII. Using Multiple Remote Control Senders Page Setup of Multiple Units Page Viewing the Features of Multiple Remote Control Senders Page Troubleshooting Problem Solution AppearsPage Problem Persists Technology Maintenance and Care Instructions Specifications Recommended Operating TemperatureAccuracy Warranty Information Page Page Support@lacrossetechnology.com FCC Disclaimer