La Crosse Technology WS-7054U instruction manual Battery cover Battery compartment

Page 6

DETAILED SETUP GUIDE

I.BATTERY INSTALLATION

A. REMOTE CONTROL SENDER

Battery cover

Battery compartment

1.Remove the mounting bracket. The bracket snaps on and off with minimal effort.

2.Remove battery cover. To do this, remove the flathead screw located in the lower-central position of the unit. The rubber weather-seal creates a tight seal for the battery cover, and does not allow the

Image 6

Contents WS-7054U Wireless 433 MHz Temperature Station Table of Contents Using Multiple Remote Control Senders FCC DisclaimerInventory of Contents Quick Setup Battery cover Battery compartment Page Indoor Temperature Station Time LCD Indoor LCD Outdoor LCD Setting the Time II. TimePress the SET button to activate the clock IV. Features Indoor Minimum and Maximum Temperatures Outdoor Minimum and Maximum Temperatures Resetting the Minimum and Maximum Temperatures Indoor Outdoor VI. Reading the Temperature Trend VII. Mounting Remote Control SenderMounting with the Screws Mounting with Adhesive Tape Indoor Temperature Station Using the TABLE-STAND Wall MountingVIII. Using Multiple Remote Control Senders Page Setup of Multiple Units Page Viewing the Features of Multiple Remote Control Senders Page Troubleshooting Problem Solution AppearsPage Problem Persists Technology Maintenance and Care Instructions Specifications Recommended Operating TemperatureAccuracy Warranty Information Page Page Support@lacrossetechnology.com FCC Disclaimer