La Crosse Technology WS-7054U instruction manual Time LCD Indoor LCD Outdoor LCD

Page 9

2.Observing the correct polarity, install 2 AA batteries.

3.Replace battery cover.

4.Wait 5-6 minutes or until both indoor and outdoor temperatures are shown on the Indoor Temperature Station.

5.The Indoor Temperature Station should now show: “-:- -” in the TIME LCD, and temperatures in the INDOOR and OUTDOOR LCD’s.

-:--

TIME LCD

INDOOR LCD

OUTDOOR LCD

6

Image 9

Contents WS-7054U Wireless 433 MHz Temperature Station Table of Contents FCC Disclaimer Using Multiple Remote Control SendersInventory of Contents Quick Setup Battery cover Battery compartment Page Indoor Temperature Station Time LCD Indoor LCD Outdoor LCD II. Time Setting the TimePress the SET button to activate the clock IV. Features Indoor Minimum and Maximum Temperatures Outdoor Minimum and Maximum Temperatures Resetting the Minimum and Maximum Temperatures Indoor Outdoor VII. Mounting Remote Control Sender VI. Reading the Temperature TrendMounting with the Screws Mounting with Adhesive Tape Indoor Temperature Station Wall Mounting Using the TABLE-STANDVIII. Using Multiple Remote Control Senders Page Setup of Multiple Units Page Viewing the Features of Multiple Remote Control Senders Page Problem Solution Appears TroubleshootingPage Problem Persists Technology Maintenance and Care Instructions Recommended Operating Temperature SpecificationsAccuracy Warranty Information Page Page Support@lacrossetechnology.com FCC Disclaimer