La Crosse Technology WS-7058U Detailed SET-UP Guide Battery Installation, Rainfall Sensor

Page 4

DETAILED SET-UP GUIDE

I.BATTERY INSTALLATION

Batteries will fit tightly. To avoid start-up problems, make sure that the batteries do not spring free.

A.REMOTE THERMO-HYGRO SENSOR

Mounting

Bracket/Receptor

Rain Cover

Battery Cover

			Thermo-Hygro
			Sensor
			Sensor
1.	Pull the cylindrical rain cover off the sensor.
2.	Remove the battery cover (located on the backside of the sensor,
	above the mounting post and bracket). Press the arrow and slide
	the battery cover off.
3.	Observing the correct polarity install 2 AA batteries.
4.	Replace battery cover, and place rain cover snugly onto the sensor.
B. RAINFALL SENSOR
1.	Remove the flat-head screw and battery cover, located on the
	underside of the base.				Battery
2.	Observe the correct				Battery
					Compartment
					Compartment
	polarity, and install two AA
	batteries.

3.Make sure the rubber weather seal is in place and replace the battery cover and screw.

4

Image 4

Contents WS-7058U Wireless 433 MHz Wireless Weather Center Table of Contents Inventory of Contents Quick SET-UP GuideRemote THERMO-HYGRO Sensor Detailed SET-UP Guide Battery InstallationRainfall Sensor Weather Center LCD ScreenProgram Mode II. Setting the LCD ContrastIV. Time Setting Function ButtonsVI. Date Setting Time Zone SettingVII. Selecting F or C and Inches or Millimeters VIII. Weather Forecast Sensitivity Setting IX. Displaying Relative hPa/inHg or Absolute hPa/inHgII. Minimum & Maximum Temperatures Displays and Functions Manually Setting the Relative AIR PressureXI. Selecting BAR Graph Display Resetting the Minimum & Maximum Records III. Weather Forecast & Weather IconsWeather Tendency Arrows Weather IconsStorm Warning Comfort Level Indicator IV. BAR Graph Histories AIR Pressure HistoryRainfall History Rainfall QuantityVI. Resetting Rainfall Information Rainfall Quantity Totals Manual Setting of the Rain MultiplicatorHard Reset of Eeprom Weather Center Memory VII. Adding More Sensors optionalSelecting Which Sensor Data to Display SET-UP of Multiple SensorsMounting Mounting with the Screws TX4U-REMOTE THERMO-HYGRO SensorMounting with Adhesive Tape II the TX5U-RAINFALL Sensor Table Stand III the WS-7058U-WEATHER CenterWall Mounting Maintenance and Care TroubleshootingProblem SolutionTemperature measuring range Sensor reading updateRelative humidity range Air pressurePower supply Dimensions L x W x HWarranty Information Support@lacrossetechnology.com