La Crosse Technology WS-7058U Program Mode, Function Buttons, II. Setting the LCD Contrast

Page 6

PROGRAM MODE

The Program Mode is laid out in a manner that allows you to program each function separately, or you can follow the instructions entirely to program the Weather Center. Complete programming is usually done for the initial set-up, and will require you to skip step 1 of each programming section (from section

IIIto XI). The programming mode can be exited at any time by either pressing the OUTDOOR button, or waiting for the 20-second time-out to take effect.

I.FUNCTION BUTTONS

There are 5 function buttons located on the front of the Weather Center, under the LCD Screens. The function buttons are labeled: SET, INDOOR, OUTDOOR, RAIN, and +.

II.SETTING THE LCD CONTRAST

1.Hold down the SET button for a second, the default setting “LCD 5” will flash in LCD 1.

2.Press the + button to advance through the LCD settings. There are 8 settings to select from—“LCD 0” is the lightest and “LCD 7” is the darkest.

3.Press the SET button to confirm, and to advance to select 12/24-hour time display.

III.12/24-HOUR TIME DISPLAY SELECTION

1.Press the SET button twice to enter the 12/24-hour selection mode.

2.The default setting “24” will flash in LCD 1.

3.Use the + to select either “12” or “24” hour time display.

4.Press the SET button to confirm, and to advance to the Time setting mode.

IV. TIME SETTING

Note: The default time, after battery installation is “0:00” or “12:00.” The Weather Center will begin to keep track of time after this.

1.Press the SET button three times to enter the Time setting mode.

2.The hour digit will flash in LCD 1.

3.Press the + button to advance the hours.

Note: When setting the hours, notice that there is no “AM” icon to indicate that the time being set is in the AM. There is only a “PM” icon. Be sure to set the time accordingly.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents WS-7058U Wireless 433 MHz Wireless Weather Center Table of Contents Inventory of Contents Quick SET-UP GuideDetailed SET-UP Guide Battery Installation Remote THERMO-HYGRO SensorRainfall Sensor Weather Center LCD ScreenIV. Time Setting Program ModeII. Setting the LCD Contrast Function ButtonsTime Zone Setting VI. Date SettingVII. Selecting F or C and Inches or Millimeters VIII. Weather Forecast Sensitivity Setting IX. Displaying Relative hPa/inHg or Absolute hPa/inHgManually Setting the Relative AIR Pressure II. Minimum & Maximum Temperatures Displays and FunctionsXI. Selecting BAR Graph Display Resetting the Minimum & Maximum Records III. Weather Forecast & Weather IconsWeather Icons Weather Tendency ArrowsStorm Warning Comfort Level Indicator IV. BAR Graph Histories AIR Pressure HistoryRainfall History Rainfall QuantityVI. Resetting Rainfall Information Rainfall Quantity Totals Manual Setting of the Rain MultiplicatorHard Reset of Eeprom Weather Center Memory VII. Adding More Sensors optionalSET-UP of Multiple Sensors Selecting Which Sensor Data to DisplayMounting TX4U-REMOTE THERMO-HYGRO Sensor Mounting with the ScrewsMounting with Adhesive Tape II the TX5U-RAINFALL Sensor III the WS-7058U-WEATHER Center Table StandWall Mounting Problem Maintenance and CareTroubleshooting SolutionRelative humidity range Temperature measuring rangeSensor reading update Air pressurePower supply Dimensions L x W x HWarranty Information Support@lacrossetechnology.com
Top Page Image Contents