La Crosse Technology WS-7058U instruction manual Weather Center, LCD Screen

Page 5

C.WEATHER CENTER

1.Remove the battery cover. To do this, place a solid object in the space provided at the lower- central position of the battery cover (the cover has white writing on it) then push up and pull out on the battery cover.

2.Observe the correct polarity, and install three AA batteries.

3.Replace the battery cover.

THE LCD SCREEN

Hanging Hole

Battery Cover

Removable Table Stand

Immediately after the batteries have been installed, the LCD (Liquid Crystal Display) Screen will completely light up for a brief moment.

Note: After the LCD Screen briefly lights up, “375” will appear at the top of the LCD, then the LCD will display the default settings. There is also a satellite icon that appears between the Outdoor temperature and humidity—this icon informs the user that the Weather Center is receiving signals from the sensors. Within 12 minutes the Outdoor temperature and humidity should be displayed—if not, remove batteries from all units and repeat battery installation.

Following is a general display description of the LCD layout. Details concerning the LCD Screen will be

explained during the complete Programming sections and the Features

& Operations sections.

LCD 1—shows the time.

LCD 2—indoor temperature/humidity. LCD 3—forecast icons and air pressure. LCD 4—rainfall/air pressure histories,

and rain quantity.

LCD 5—air pressure and rain quantity LCD 6—outdoor temperature/humidity.

LCD 1

LCD 2

LCD 3

LCD 4

LCD 5

LCD 6

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents WS-7058U Wireless 433 MHz Wireless Weather Center Table of Contents Quick SET-UP Guide Inventory of ContentsRainfall Sensor Detailed SET-UP Guide Battery InstallationRemote THERMO-HYGRO Sensor LCD Screen Weather CenterII. Setting the LCD Contrast Program ModeIV. Time Setting Function ButtonsVII. Selecting F or C and Inches or Millimeters Time Zone SettingVI. Date Setting IX. Displaying Relative hPa/inHg or Absolute hPa/inHg VIII. Weather Forecast Sensitivity SettingXI. Selecting BAR Graph Display Manually Setting the Relative AIR PressureII. Minimum & Maximum Temperatures Displays and Functions III. Weather Forecast & Weather Icons Resetting the Minimum & Maximum RecordsStorm Warning Weather IconsWeather Tendency Arrows IV. BAR Graph Histories AIR Pressure History Comfort Level IndicatorRainfall Quantity Rainfall HistoryManual Setting of the Rain Multiplicator VI. Resetting Rainfall Information Rainfall Quantity TotalsVII. Adding More Sensors optional Hard Reset of Eeprom Weather Center MemoryMounting SET-UP of Multiple SensorsSelecting Which Sensor Data to Display Mounting with Adhesive Tape TX4U-REMOTE THERMO-HYGRO SensorMounting with the Screws II the TX5U-RAINFALL Sensor Wall Mounting III the WS-7058U-WEATHER CenterTable Stand Troubleshooting Maintenance and CareProblem SolutionSensor reading update Temperature measuring rangeRelative humidity range Air pressureDimensions L x W x H Power supplyWarranty Information Support@lacrossetechnology.com
Top Page Image Contents