La Crosse Technology III the WS-7058U-WEATHER Center, Table Stand, Wall Mounting

Page 19

III)THE WS-7058U—WEATHER CENTER

The Weather Center can be mounted in 2 ways:

•With the included table stand, or

•By mounting to a wall.

A)TABLE STAND

1)Insert the larger, front tab of the table stand into the receptacle underneath the Weather Center (if held upright).

2)Push up on the back of the table stand until the two tabs on the back snap into place.

3)Place the Weather Center in an appropriate location, where transmission signals can be received.

4)To remove the table stand, pull down on the back until the two tabs are free from the Weather Center.

B)WALL MOUNTING

1)Remove the table stand.

2)Install a mounting screw (not included) into a wall within transmission range—leaving approximately 3/16 of an inch (5mm) extended from the wall.

3)Place the Weather Center onto the screw using the hanging hole on the backside. Gently pull the Weather Center down to lock the screw into place.

19

Image 19

Contents WS-7058U Wireless 433 MHz Wireless Weather Center Table of Contents Quick SET-UP Guide Inventory of ContentsRemote THERMO-HYGRO Sensor Detailed SET-UP Guide Battery InstallationRainfall Sensor LCD Screen Weather CenterFunction Buttons Program ModeII. Setting the LCD Contrast IV. Time SettingVI. Date Setting Time Zone SettingVII. Selecting F or C and Inches or Millimeters IX. Displaying Relative hPa/inHg or Absolute hPa/inHg VIII. Weather Forecast Sensitivity SettingII. Minimum & Maximum Temperatures Displays and Functions Manually Setting the Relative AIR PressureXI. Selecting BAR Graph Display III. Weather Forecast & Weather Icons Resetting the Minimum & Maximum RecordsWeather Tendency Arrows Weather IconsStorm Warning IV. BAR Graph Histories AIR Pressure History Comfort Level IndicatorRainfall Quantity Rainfall HistoryManual Setting of the Rain Multiplicator VI. Resetting Rainfall Information Rainfall Quantity TotalsVII. Adding More Sensors optional Hard Reset of Eeprom Weather Center Memory Selecting Which Sensor Data to Display SET-UP of Multiple Sensors Mounting Mounting with the Screws TX4U-REMOTE THERMO-HYGRO SensorMounting with Adhesive Tape II the TX5U-RAINFALL Sensor Table Stand III the WS-7058U-WEATHER CenterWall Mounting Solution Maintenance and CareTroubleshooting ProblemAir pressure Temperature measuring rangeSensor reading update Relative humidity rangeDimensions L x W x H Power supplyWarranty Information Support@lacrossetechnology.com