La Crosse Technology WS-7076U Resetting the Mimimum and Maximum Records, Alarm Function

Page 16

C.RESETTING THE MIMIMUM AND MAXIMUM RECORDS

1.All the indoor records (minimum and maximum) will be reset after the “IN” button is pressed and held for 5 seconds.

2.All the outdoor records (minimum and maximum) will be reset after the “OUT” button is pressed and held for 5 seconds.

V.ALARM FUNCTION

A. SETTING THE ALARM (alarms 1 and 2)

Note: There are two alarms that can set. Each alarm will sound for a complete duration of 2 minutes.

1.Press and hold the “AL1”

button for 5 seconds or until the alarm-time display flashes in the DATE LCD.

2. Press and release the “IN” button to set the alarm hours, press and release the “OUT” button to set the alarm minutes.

3.Press the “AL1” button or

wait 15 seconds for the unit to automatically confirm the alarm time and return to display the date in the DATE LCD as normal.

4.The ((1)) icon, appearing in the DATE LCD, indicates that the alarm is set to sound at the programmed time.

5.Programming the alarm time automatically activates the alarm to sound at the programmed time. To deactivate the alarm, press the “AL1” button (removing the ((1)) icon from the screen). To reactivate the alarm, press the “AL1” button again.

6.After each activation or deactivation, the programmed alarm time is displayed. Wait 15 seconds and the date will display in the DATE LCD again.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents WS-7076U Wireless 433 MHz Radio-controlled Weather Station Contents Inventory of Contents About Wwvb Radio Controlled Time Quick SET-UP Guide Do not Press ANY Buttons for 15 MinutesIndoor Weather Station Program Mode Programming SequenceII or 24 Hour Time Setting III. Time Zone SettingII. Function Keys Date LCDIV. Daylight Saving Time DST Setting Manual Time Setting Wwvb Remote Control TimeTime VI. Setting the DAY, DATE, and Year VII. Selecting F or C VIII. Setting the LCD Contrast Features of the WS-7076U II. Indoor TemperatureIII. Outdoor Temperature Back LightViewing the Indoor Temperature Records IV. Minimum and Maximum Temperature RecordsViewing the Outdoor Temperature Records Alarm Function Resetting the Mimimum and Maximum RecordsSetting the Alarm alarms 1 Snoozing and Stopping the Alarm VI. Adding Outdoor Remote Control Senders OptionalSET-UP of Multiple Units Outdoor LCDMounting with Screws Mounting Remote Temperature SensorMounting with Adhesive Tape Using the Table Stand II. the Indoor Temperature StationWall Mounting Troubleshooting Maintenance and Care InstructionsSpecifications Temperature measuring rangePower Supply Dimensions L x W x HPage FCC ID OMO-01RX receiver, OMO-01TX sensor
Top Page Image Contents