La Crosse Technology WS-7076U Mounting Remote Temperature Sensor, Mounting with Screws

Page 19

MOUNTING

Note: Before permanently mounting ensure that the indoor weather station is able to receive WWVB signals from the desired location. Also, extreme and sudden changes in temperature will decrease the accuracy of the indoor weather station and changes in elevation will result with inaccurate weather forecasting for the next 12 to 24 hours. These changes will require a 12 to 24 hour wait before obtaining reliable data. To achieve a true temperature reading, avoid mounting where direct sunlight can reach the remote temperature sensor. We recommend that you mount the remote temperature sensor on a North-facing wall. The sending range is 80ft— obstacles such as walls, concrete and large metal objects can reduce the range. Place both units in their desired location and wait approximately 15 minutes before permanently mounting to ensure that there is proper reception. The indoor weather station should display a temperature in the OUTDOOR LCD within 4 minutes of setting up.

I. THE REMOTE TEMPERATURE SENSOR

The remote temperature sensor can be mounted in two ways:

•with the use of screws, or

•using the adhesive tape.

A. MOUNTING WITH SCREWS

1)Remove the mounting bracket from the remote temperature sensor.

2)Place the mounting bracket over the desired location. Through the three screw holes of the bracket, mark the mounting surface with a pencil.

3)Where marked, start the screw holes into mounting surface.

4)Screw mounting bracket onto the mounting surface. Ensure that the screws are flush with the bracket.

B. MOUNTING WITH ADHESIVE TAPE

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents WS-7076U Wireless 433 MHz Radio-controlled Weather Station Contents Inventory of Contents About Wwvb Radio Controlled Time Do not Press ANY Buttons for 15 Minutes Quick SET-UP GuideIndoor Weather Station Programming Sequence Program ModeDate LCD II or 24 Hour Time SettingIII. Time Zone Setting II. Function KeysIV. Daylight Saving Time DST Setting Manual Time Setting Wwvb Remote Control TimeTime VI. Setting the DAY, DATE, and Year VII. Selecting F or C VIII. Setting the LCD Contrast Back Light Features of the WS-7076UII. Indoor Temperature III. Outdoor TemperatureViewing the Indoor Temperature Records IV. Minimum and Maximum Temperature RecordsViewing the Outdoor Temperature Records Alarm Function Resetting the Mimimum and Maximum RecordsSetting the Alarm alarms 1 VI. Adding Outdoor Remote Control Senders Optional Snoozing and Stopping the AlarmOutdoor LCD SET-UP of Multiple UnitsMounting with Screws Mounting Remote Temperature SensorMounting with Adhesive Tape Using the Table Stand II. the Indoor Temperature StationWall Mounting Maintenance and Care Instructions TroubleshootingDimensions L x W x H SpecificationsTemperature measuring range Power SupplyPage FCC ID OMO-01RX receiver, OMO-01TX sensor
Top Page Image Contents