La Crosse Technology WS-7076U Specifications, Temperature measuring range, Power Supply

Page 22

Opening the casings invalidates the warranty. Do not try to repair the unit. Contact La Crosse Technology for repairs.

SPECIFICATIONS

Temperature measuring range:

 

Indoor:

32°F to 139.8°F with 0.2°F resolution.

 

(0°C to 59.9°C with 0.1°C resolution)

 

“OFL” displayed if outside this range

Outdoor:

-21.8°F to 157.2°F with 0.2°F

 

resolution.

 

(-29.9°C to 69.9°C resolution) “OFL”

 

displayed if outside this range

Indoor temperature checking

Every 10 seconds

interval:

 

Outdoor temperature checking

Every 1 minute

interval:

 

(Remote Temperature Sensor)

 

Outdoor temperature reception:

Every 5 minutes

(Indoor Weather Station)

 

Transmission Range:

80 feet (in open space)

 

 

Power Supply:

 

Indoor Weather Station:

2 x AA, IEC LR6, 1.5V

Remote Temperature Sensor:

2 x AA, IEC LR6, 1.5V

Battery life cycle:

Approximately 12 months

Recommended battery type:

Alkaline

 

 

Dimensions (L x W x H)

 

Indoor Weather Station (without

3.2” x 1.1” x 5.7”

stand):

(81 x 30 x 145mm)

Remote Temperature Sensor:

1.57“ x 0.9“ x 5.04“

 

(40 x 23 x 128 mm)

WARRANTY INFORMATION

22

Image 22
Contents WS-7076U Wireless 433 MHz Radio-controlled Weather Station Contents Inventory of Contents About Wwvb Radio Controlled Time Quick SET-UP Guide Do not Press ANY Buttons for 15 MinutesIndoor Weather Station Program Mode Programming SequenceII. Function Keys II or 24 Hour Time SettingIII. Time Zone Setting Date LCDIV. Daylight Saving Time DST Setting Manual Time Setting Wwvb Remote Control TimeTime VI. Setting the DAY, DATE, and Year VII. Selecting F or C VIII. Setting the LCD Contrast III. Outdoor Temperature Features of the WS-7076UII. Indoor Temperature Back LightViewing the Indoor Temperature Records IV. Minimum and Maximum Temperature RecordsViewing the Outdoor Temperature Records Alarm Function Resetting the Mimimum and Maximum RecordsSetting the Alarm alarms 1 Snoozing and Stopping the Alarm VI. Adding Outdoor Remote Control Senders OptionalSET-UP of Multiple Units Outdoor LCDMounting with Screws Mounting Remote Temperature SensorMounting with Adhesive Tape Using the Table Stand II. the Indoor Temperature StationWall Mounting Troubleshooting Maintenance and Care InstructionsPower Supply SpecificationsTemperature measuring range Dimensions L x W x HPage FCC ID OMO-01RX receiver, OMO-01TX sensor