La Crosse Technology WS-7076U instruction manual Snoozing and Stopping the Alarm

Page 17

7.To set, activate and deactivate alarm 2, follow the directions above for alarm 1—using the “AL2” button instead of the “AL1” button. The ((2)) icon will represent activation and deactivation of Alarm 2.

B. SNOOZING AND STOPPING THE ALARM

1.The snooze function is activated by pressing any one of the following buttons: “SET”, “IN”, “OUT” or “SNZ”.

2.To turn the alarm off completely, press any of these buttons: “CH”, “AL1”, “AL2” or “DATE”.

3.The snooze function will last for 5 minutes before the alarm begins to sound again. Either the ((1)) or the ((2)) icon will flash during the snooze mode.

VI. ADDING OUTDOOR REMOTE CONTROL SENDERS (OPTIONAL)

The WS-7076U is able to receive signals from 3 different remote temperature sensors. The remote temperature sensor model(s) that you choose will come with their own set of instructions. Follow these instructions for a complete guide to setting up. Following are some brief instructions for the basic set-up of remote temperature sensor units with the WS-7076U. These extra remote temperature sensors can be purchased through the same dealer as this unit, or by contacting La Crosse Technology directly. A TX6U will monitor temperature only, a TX3U will monitor temperature and display the temperature on its LCD, and the TX3UP will monitor the temperature via a probe for measuring soil or water temperatures..

Note: When setting up multiple units it is important to remove the batteries from all existing units in operation. Then insert batteries into all the remote temperature sensor units in numeric sequence. Second, install batteries into the indoor weather station. Transmission problems will arise if this is not done correctly and if the total time for set-up exceeds 6 minutes.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents WS-7076U Wireless 433 MHz Radio-controlled Weather Station Contents Inventory of Contents About Wwvb Radio Controlled Time Do not Press ANY Buttons for 15 Minutes Quick SET-UP GuideIndoor Weather Station Programming Sequence Program ModeIII. Time Zone Setting II or 24 Hour Time SettingII. Function Keys Date LCDIV. Daylight Saving Time DST Setting Time Wwvb Remote Control TimeManual Time Setting VI. Setting the DAY, DATE, and Year VII. Selecting F or C VIII. Setting the LCD Contrast II. Indoor Temperature Features of the WS-7076UIII. Outdoor Temperature Back LightViewing the Outdoor Temperature Records IV. Minimum and Maximum Temperature RecordsViewing the Indoor Temperature Records Setting the Alarm alarms 1 Resetting the Mimimum and Maximum RecordsAlarm Function VI. Adding Outdoor Remote Control Senders Optional Snoozing and Stopping the AlarmOutdoor LCD SET-UP of Multiple UnitsMounting with Adhesive Tape Mounting Remote Temperature SensorMounting with Screws Wall Mounting II. the Indoor Temperature StationUsing the Table Stand Maintenance and Care Instructions TroubleshootingTemperature measuring range SpecificationsPower Supply Dimensions L x W x HPage FCC ID OMO-01RX receiver, OMO-01TX sensor
Top Page Image Contents