TROUBLESHOOTING
Problem: | The Projection is faint | |
Solution: | 1) | Change intensity setting |
| 2) | Use AC adapter |
| 3) | Darken surroundings |
| 4) | Use fresh batteries (if AC is not used) |
Problem: | The LCD is faint. | |
Solution: | 1) | Replace the batteries. |
Problem: | No reception of WWVB signal. | |
Solution: | 1) | It may help reception to face the front of the Projection alarm |
|
| in the general direction of Ft. Collins, Colorado. |
| 2) | Wait overnight for signal. |
| 3) | Be sure the Projection alarm is at least 6 feet from any |
|
| electrical devices, i.e. TV sets, computers, or other radio |
|
| controlled clocks. |
| 4) | Remove batteries for five minutes, reinsert and leave the unit |
|
| alone overnight without pressing buttons. |
| 5) | If problems persist contact La Crosse Technology. |
Problem: | Hour is incorrect (minute and date are correct). | |
Solution: | 1) | Be sure correct time zone and daylight saving time are |
| selected. | |
Note: For any questions not answered, please contact La Crosse Technology’s Technical Support with the contact information found at the end of this instructional manual.
SPECIFICATIONS FOR WT-5720
Power source:
AC Adapter (included) | Input: 120VAC/60Hz Output: DC 6V/100MA |
Battery type: | Station: 2 x AA, 1.5V (Alkaline) (optional) |
Battery life: | Approximately 12 months, depending on |
| projection and light use |
Dimensions (L x W x H): | 5.25”W x 3.75”H x 1.25”L |
13