La Crosse Technology WT-5600 instruction manual Quick SET-UP Guide

Page 4

QUICK SET-UP GUIDE

1)Insert two AA batteries into the Projection alarm and/or plug into wall

2)Wait 10 minutes for WWVB reception.

3)If there is no WWVB reception, manually set the time and date (instructions in the Program Mode).

4)Program the settings.

5)Mount the WT-5600 in a suitable location, where WWVB signal can be received.

6)The projector will activate and remain on if the alarm clock is plugged in. If only batteries are used, the projector will only be activated when a button is pressed.

7)See the “Features” section for instructions on projection direction, etc.

4

Image 4

Contents WT-5600 Radio Controlled Projection Alarm Table of Contents Inventory of Contents Features of Projection AlarmQuick SET-UP Guide Detailed SET-UP Guide Battery Installation Time Zone Setting Program ModeProgramming Sequence Time Setting Date Setting 12/24-HOUR ModeFeatures & Operations Daylight Savings TimeRADIO-CONTROLLED Time and Date Projection of Time Time Alarm Setting the AlarmLCD Light ACTIVATING/DEACTIVATING the Alarm Turning Alarm OFF While SoundingChanging Display Mode DAY, SECONDS, and Alarm Time Maintenance & CareTroubleshooting Specifications for WT-5720Warranty Information FCC ID OMO-01RX receiver