La Crosse Technology WT-5600 instruction manual Time Setting

Page 7

-4h

Atlantic Time

-5h

Eastern Time (default setting)

-6h

Central Time

-7h

Mountain Time

-8h

Pacific Time

-9h

Alaskan Time

-10h

Hawaiian Time

-11h, -12h

Next two time zones West of HAW

0h

Greenwich Mean Time

-1h, -2h, -3h

Three time zones West of GMT

3.From –5h to –8h, a US map with the highlighted time zone will also be displayed to the right of the time display.

4.Press the “AL” button to move to the hour setting or press the “SNOOZE” button to confirm the time zone and return to the display mode.

D.TIME SETTING

Note: When the WWVB signal is found, that time will over-ride the manually set time.

1.Hold down the “MODE/+” button for 2 seconds (the selected time zone will flash), press the “AL” button once until the hour flashes in the time LCD.

2.Press the “MODE/+” button to select the hour.

3.Press the “AL” button to move to the minute setting.

a.Note: When setting the hour, “PM” will appear to the left of the hour display, if it is “AM” nothing will appear.

4.Press the “MODE/+” button to select the minutes.

5.Press the “AL” button to confirm the time setting and advance to manually set the date or press the “SNOOZE” button to confirm the time and return to the display mode.

7

Image 7
Contents WT-5600 Radio Controlled Projection Alarm Table of Contents Features of Projection Alarm Inventory of ContentsQuick SET-UP Guide Detailed SET-UP Guide Battery Installation Time Zone Setting Program ModeProgramming Sequence Time Setting Daylight Savings Time Date Setting12/24-HOUR Mode Features & OperationsRADIO-CONTROLLED Time and Date Projection of Time Time Alarm Setting the AlarmLCD Light Turning Alarm OFF While Sounding ACTIVATING/DEACTIVATING the AlarmMaintenance & Care Changing Display Mode DAY, SECONDS, and Alarm TimeSpecifications for WT-5720 TroubleshootingWarranty Information FCC ID OMO-01RX receiver