STEP7 Setting the time
CLOCK/TIMER
SKIP
DEMO function
– DEMO
This is a 24-hour clock.
123
Select | Set the time | Press to finish |
“CLOCK”. | (press within 7 | setting the time. |
| seconds or so). |
|
•The time is shown for about 5 seconds when you select “CLOCK” again.
•Reset the clock regularly to maintain accuracy.
When the unit is first plugged in, a demonstration of its functions may be shown on the display.
If the demo setting is off, you can show a demonstration by turning on the demo.
Press and hold [–DEMO].
The display changes each time the button is held down.
NO DEMO (off) ↔ DEMO ON (on)
You can reduce the power consumed in standby mode by turning the demonstration off.
Simple setup
11
RQT7700