Panasonic SC-VK71D Recording operations, Press and hold Play Mode to select the reverse mode

Adhesive tape

Recording operations

Recording
REC	, DVD/CD
, TAPE
	, STOP
, DECK1	, DECK2
PLAY MODE
, TAPE
	, DVD/CD

Selection of tapes for recording

Use normal position tapes.

High position and metal position tapes can be used, but this unit will not be able to record or erase them correctly.

Preparation:

•Wind up the leader tape so recording can begin immediately.

•Press [; :, TAPE] and then [L] (main unit: [L, STOP].

1Press [c, DECK2] on the main unit and insert the cassette to be recorded.

Insert with the side to be recorded facing towards you and the exposed tape facing down.

The tape direction is automatically set to “F”.

2Press and hold [PLAY MODE] to select the reverse mode.

Every time you press and hold the button:

: One side only records.

, : Both sides record (forward → reverse).

“” is automatically changed to “” when [[ REC] is pressed.

3Select the source to be recorded.

Radio recording:

Tune to the required station. (A page 24)

1Disc recording:

Insert the disc(s) you want to record.

2Press [:, DVD/CD] and then [L] (main unit: [L, STOP]). Prepare the desired disc recording mode.

•To record programmed tracks (A do steps 1–3 on page 17). Ensure disc is stopped.

1Tape-to-tape recording:

2Press [; :, TAPE] and then [L] (main unit: [L, STOP]). Press [c, DECK1] on the main unit and insert the cassette you want to record.

4Press [[ REC] on the main unit to start recording.

To stop recording

Press [L] (main unit: [L, STOP]).

If the tape finishes before the disc

The disc continues playing. Press [L] (main unit: [L, STOP]) to stop it.

Note

•Multi-channel sources (3 to 5.1 channels) are automatically down- mixed to 2 channels during recording.

•Changes to volume and sound or field quality do not affect recording except for Multi Re-master.

•You cannot open deck 1 while recording.

•You cannot fast-forward or rewind one deck while recording with the other.

Erasure prevention
Use a screwdriver or similar	Side A
object to break out the tab.

Tab for side B Tab for side A

To re-record on a protected cassette

Cover the hole with adhesive tape.

To erase a tape

1. Press [; :, TAPE] and then [L] (main unit: [L, STOP]).

2.Insert the recorded tape into deck 2. Ensure there is no tape in deck 1.

3.Press and hold [PLAY MODE] to select the reverse mode.

4.Press [[ REC] on the main unit.

RQT7700