Panasonic SC-VK91D, SC-VK71D, SC-VK81D manual Specifications

Specifications

AMPLIFIER SECTION

VK91D
RMS Output Power: Dolby Digital Mode
Front – High Ch	90	W per channel (6 Ω), 1 kHz, 10% THD
Front – Low Ch	45 W per channel (12 Ω), 100 Hz, 10% THD
Surround Ch	45	W per channel (6 Ω), 1 kHz, 10% THD
Center Ch	100	W per channel (6 Ω), 1 kHz, 10% THD
Subwoofer	95 W per channel (6 Ω), 100 Hz, 10% THD
Total RMS Dolby Digital mode power			650 W
PMPO output power			7300 W
VK81D
RMS Output Power: Dolby Digital Mode
Front Ch	80	W per channel (6 Ω), 1 kHz, 10% THD
Surround Ch	35	W per channel (6 Ω), 1 kHz, 10% THD
Center Ch	85	W per channel (6 Ω), 1 kHz, 10% THD
Subwoofer	85 W per channel (6 Ω), 100 Hz, 10% THD
Total RMS Dolby Digital mode power			400 W
For Saudi Arabia, Kuwait, the Middle East, South Africa and Southeast Asia
PMPO output power			4800 W
VK71D
RMS Output Power: Dolby Digital Mode
Front Ch	70	W per channel (6 Ω), 1 kHz, 10% THD
Surround Ch	35	W per channel (6 Ω), 1 kHz, 10% THD
Center Ch	70	W per channel (6 Ω), 1 kHz, 10% THD
Total RMS Dolby Digital mode power			280 W
PMPO output power			3000 W

FM/AM TUNER, TERMINALS SECTION

Preset station			FM 15 stations
			AM 15 stations
Frequency Modulation (FM)
Frequency range		87.50 – 108.00 MHz (50 kHz step)
Sensitivity			2.5 µV (IHF)
S/N 26 dB			2.2 µV
Antenna terminals			75 Ω (unbalance)
Amplitude Modulation (AM)
Frequency range
For Saudi Arabia, Kuwait, the Middle East, South Africa and Southeast Asia
		522 – 1629 kHz (9 kHz step)
		520 – 1630 kHz (10 kHz step)
For Australia and N.Z.	VK81D
		522 – 1629 kHz (9 kHz steps)
AM sensitivity S/N 20 dB at 1000 kHz			560 µV/m
Audio performance (Amplifier)
Input sensitivity/Input impedance
Aux			250 mV, 20 kΩ
Phone jack
Terminal			Stereo, 3.5 mm jack
For Saudi Arabia, Kuwait, the Middle East, South Africa and Southeast Asia
Mic jack
Sensitivity			0.7 mV, 600 Ω
Terminal		Mono, 6.3 mm jack (2 system)

CASSETTE DECK SECTION

Type	Auto Reverse
Track system	4-Track, 2 Channel
Head Record/Playback	Solid Permalloy Head
Erasure	Double Gap Ferrite Head
Motor	DC Servo Motor
Recording System	AC Bias 100 kHz
Erase System	AC Erase 100 kHz
Tape Speed	4.8 cm/s
Overall Frequency Response (+3, –6 dB) at DECK OUT
Normal (TYPE I)	35 Hz –14 kHz
S/N Ratio	50 dB (A weighted)
Wow and Flutter	0.18% (WRMS)
Fast Forward and Rewind Time	Approx. 120 seconds with
	C-60 cassette tape

DISC SECTION

Disc played [8 cm or 12 cm]

(1)DVD-RAM (DVD-VR compatible, JPEG formatted disc)

(2)DVD-Audio

(3)DVD-Video

(4)DVD-R (DVD-Video compatible)

(5)CD-Audio (CD-DA)

(6)Video CD

(7)SVCD (Conforming to IEC62107)

(8)CD-R/CD-RW (CD-DA, Video CD, SVCD, MP3, WMA, JPEG formatted disc)

(9)MP3/WMA\

•Compatible compression rate:

MP3: between 32 kbps and 320 kbps

WMA: between 48 kbps and 192 kbps

(10)JPEG\

•Exif Ver 2.1 JPEG Baseline files

•Picture resolution: between 320x240 and 6144x4096 pixels (sub sampling is 4:2:2 or 4:2:0)

(11)HighMAT Level 2 (Audio and Image)

\The total combined maximum number of recognizable audio and picture contents and groups: 4000 audio and picture

contents and 400 groups.
Pick up
Wavelength (DVD/CD)		662 nm/785 nm
Audio output (Disc)
Number of channels		5.1 ch (FL, FR, C, SL, SR, SW)
Audio performance (measurement at: Line out terminal)
Frequency response
• CD-Audio		4 Hz – 20 kHz (+1, –2 dB)
VIDEO SECTION
Video system
Signal system		PAL625/50, PAL525/60, NTSC
Composite video output
Output level		1 Vp-p (75 Ω)
Terminal		Pin jack (1 system)
S VIDEO output
Y output level		1 Vp-p (75 Ω)
C output level		0.3 Vp-p (75 Ω) (PAL)
		0.286 Vp-p (75 Ω) (NTSC)
Terminal		S terminal (1 system)
Component video output (480P/480I)
Y output level		1 Vp-p (75 Ω )
PB output level		0.7 Vp-p (75 Ω)
PR output level		0.7 Vp-p (75 Ω)
Terminal	Pin jack (Y: green, PB: blue, PR: red) (1 system)

Reference

39

RQT7700