Aluratek AIRMM02F manual Configure as a Wireless Access Point AP Mode

Chapter 3: Configuration

Manually configured as Wired Client Mode: (cont.)

	Instructions	Screenshot	Go to next	Notes
			screen
8.				The device is in
				wired client mode
				now.
9.				The device is
				connected to
				your network

Chapter 3: Configuration

3.3 Configure as a Wireless Access Point (AP Mode)

AIRMM02F can also be configured as a wireless AP. With this feature, you can easily extend the wireless coverage without purchasing another AP.

To configure AIRMM02F as an AP, you have to manually setup the de- vice through selecting the MMI menu “Setup/Advanced Setup/Configure Network/AP mode”. And then setup the IP address scheme, SSID, channel number and the encryption key of the AP. Once the setting is finished, the device will reboot automatically and function as an AP.

Manually configured as a Wireless Access Point (AP Mode):

	Instructions	Screenshot	Go to next	Notes
			screen
1.			“OK” button or	Initial screen
			press the right
			rotary wheel.
2.	“▼“ button		“►” button or
	(4 times) or		“OK” button or
	rotate right		press the right
	rotary wheel		rotary wheel.
	clockwise.
3.	“▼” button		“►” button or
	(1 times) or		“OK” button or
	rotate right		press the right
	rotary wheel		rotary wheel.
	clockwise.
4.	“▼” button		“►” button or	Manually select
	(2 times) or		“OK” button or	the AP mode.
	rotate right		press the right
	rotary wheel		rotary wheel.
	clockwise.
5.	“▼” button		“►” button or	Select the DHCP
	(1 times) or		“OK” button or	for auto configured
	rotate right		press the right	IP address.
	rotary wheel		rotary wheel.
	clockwise.

18 19