Aluratek AIRMM02F manual Advanced Tools Misc, Step, Clock Setting

Chapter 6: Advanced Tools Chapter 7: Misc.

Steps to upgrade new firmware in the device via a USB drive

Step 1.

Copy the new firmware to the ROOT directory of a USB drive or a USB MP3 player. (Note. Please DON’T modify the file name, otherwise the AIRMM02F can’t find the new F/W)

Step 2.

Power on the AIRMM02F and then plug-in the USB drive into the front USB port of the AIRMM02F.

Step 3.

Operate the AIRMM02F to get into the F/W upgrade menu (“Setup\Ad- vanced Setup\F/W Upgrade(thru. USB)”), then press the OK button to activate the

F/W Upgrade function. You should see the following messages “F/W Upgrading”, and “Don’t Power OFF!!”. After a few seconds, the device will reboot automatically when the upgrade operation is completed.

Step 4.

You can verify the firmware upgrade is successful by checking the firm- ware version from the menu “Setup\Advanced Setup\Firmware Version”.

7.1 Clock Setting

Prior to setting the alarm, you need to set the clock of AIRMM02F. First, select the Setup function from the Main Menu.

The first item “Clock” is for the date and time setting. Press OK or “ ” button to set the clock value.

There are 3 items in the clock menu, the first one will display the cur- rent date and time; the second item is for you to set the date and time manually or via auto-Sync (automatically synchronize with network time server). If you select the “Auto-sync” function, the device will periodically synchronize with the server. The third option lets you change time dis- play format between 12-Hours or 24-Hours. There is a built-in battery in the device, so if you power off the device, the clock will continue to run.

42 43