Aluratek AIRMM02F manual Configure as a Wired Client

Chapter 3: Configuration

3.2 Configure as a Wired Client

If there is no 802.11b/g wireless network in your home, and only wired

802.3network is available, AIRMM02F can also connect to the wired network through an Ethernet cable.

In this situation, prior to power on the device, you have to plug the Eth- ernet cable into the RJ45 connector. And then power on the device. The device will automatically go into the wired client mode when it detects a link status through the Ethernet connection during device startup.

First time using device with an Ethernet cable plugged in:

	Instructions	Screenshot	Go to next	Notes
			screen
1.		Aluratek		Initial screen
2.			“►” button or	Device is running
			“OK” button or	as a Wireless
			press the right	Client.
			rotary wheel.
3.			“►” button or	Select the inter-
			“OK” button or	net radio menu
			press the right	language.
			rotary wheel.
4.

5.	Press STOP on
	remote control

Chapter 3: Configuration

First time using device with an Ethernet cable plugged in: (cont.)

	Instructions	Screenshot	Go to next	Notes
			screen
6.
7.	“ “ button		“►” button or
	(5 times) or		“OK” button or
	rotate right		press the right
	rotary wheel		rotary wheel.
	clockwise.
8.	“▼” button		“►” button or
	(1 times) or		“OK” button or
	rotate right		press the right
	rotary wheel		rotary wheel.
	clockwise.
9.	“▼” button		“►” button or
	(1 times) or		“OK” button or
	rotate right		press the right
	rotary wheel		rotary wheel.
	clockwise.
10.	“▼” button		“►” button or
	(1 times) or		“OK” button or
	rotate right		press the right
	rotary wheel		rotary wheel.
	clockwise.
11.			“►” button or
			“OK” button or
			press the right
			rotary wheel.
12.			“►” button or
			“OK” button or
			press the right
			rotary wheel.

14 15