Aluratek AIRMM02F manual Manually configured as the Wireless Client Mode

Chapter 3: Configuration

Manually configured as the Wireless Client Mode:

	Instructions	Screenshot	Go to next	Notes
			screen
1.			“OK” button or	Initial screen
			press the right
			rotary wheel.
2.	“ “ button		“►” button or
	(4 times) or		“OK” button or
	rotate right		press the right
	rotary wheel		rotary wheel.
	clockwise.
3.	“▼” button		“►” button or
	(1 times) or		“OK” button or
	rotate right		press the right
	rotary wheel		rotary wheel.
	clockwise.
4.			“►” button or	Manually select
			“OK” button or	the wireless
			press the right	client mode.
			rotary wheel.
5.				Scanning for
				available APs.
				Please select
				WPS Disable if
				your router does
				not gave this
				function.
6.	“▼” button		“►” button or	Select the
	(1 times) or		“OK” button or	desired AP to
	rotate right		press the right	connect
	rotary wheel		rotary wheel.
	clockwise.

Chapter 3: Configuration

Manually configured as the Wireless Client Mode (cont.):

	Instructions	Screenshot	Go to next	Notes
			screen
7.			“OK” button or	You can use the
			press the right	numeric/ alphabet
			rotary wheel.	keypad on remote
				control to input
				the WEP key, or
				you can use the
				option button to
				change the abc/
				ABC/123/~!# input.
				Note: Case sensitive.
8.			“►” button or	Confirm to the
			“OK” button or	settings above.
			press the right
			rotary wheel.
9.				Apply new
				settings.
10.				The device is in
				wireless client
				mode now.
11.				The device is
				connected to
				your network.

12 13