INSTALLATION PROCEDURE FOR:

INSTRUCTION SHEET NO.

1001FEM, 1101FEM and 1101FEL Series Frame-In Kits

 

IS:1101FEM

with Emergency Backup

 

IMPORTANT SAFEGUARDS – READ AND FOLLOW ALL SAFETY INSTRUCTIONS

 

D1007

 

Page 2 of 4

 

 

 

 

INSTALLATION INSTRUCTIONS FOR WOOD FRAME CEILING APPLICATIONS

1PREPARATION: Remove Wing Nuts on T-Bar Clips and remove clips from Luminaire Frame. Loosen Wing Nuts on Frame Clamps enough to allow free movement of Mounting Bars (Figure A). The Mounting Bars may be readily adjusted to fit openings between 13” (330mm) minimum and 24” (610mm) maximum.

2POSITION AND INSTALL LUMINAIRE FRAME: Position Luminaire Frame between joists with the End bracket at one end placed against, and flush to the bottom of, the joist (Figure B). When positioned, hammer the integral nailing tabs at both ends of the End bracket into the joist (Figure C). Extend the End bracket at the opposite end of the Luminaire Frame until it contacts the opposite joist. Align and attach. The frame can be fully secured by driving a nail or screw through any of the holes provided at each end of the End bracket. Slide the Luminaire Frame along the Mounting Bars until the aperture is in the desired position and lock the Frame in place by tightening the Wing Nuts on the Frame Clamps.

NOTE: When the Luminaire Frame is to be used with Wall Wash Trims make sure to orient the Luminaire Frame side indicated by a label on the frame towards the wall to be illuminated.

*INSTALLATION OPTION FOR REGIONS USING STRAPPING: The Luminaire Frame may be installed directly to strapping as above by screwing the End Bracket to the strapping using the hole provided. The Nailing Tab is not used in this case.

Optionally, the Luminaire Frame may be attached to the joists between strapping, and positioned 5/8” lower to account for the strapping thickness, by bending the provided End bracket tabs 90˚ as shown (Figure D) with a pair of pliers. These bent tabs may now be used to position the Luminaire Frame vertically with reference to the joists so that the frame is flush to the strapping. Attach the Luminaire Frame to the joists as described above (Figure E).

Figure A

Figure C

Figure E

 

Figure B

Figure D

 

WIRING:

1.Make sure A.C. power is off at the main power supply.

2.A.C. Ballast and Emergency Ballast must be fed from the same branch circuit.

3.In switched luminaire installations the Emergency Ballast must be connected ahead of any local switching.

4.Check markings on fixture before making connections in junction box. See additional battery pack instruction sheet for wiring diagrams.

5.Be sure all electrical connections are made before connecting UNIT CONNECTOR located in JUNCTION BOX.

A COMPANY

631 Airport Road, Fall River, MA 02720

Page 2
Image 2
Lightolier 1001FEM Series, 1101FEL Series Important Safeguards Read and Follow ALL Safety Instructions, Wiring

1001FEM Series, 1101FEM Series, 1101FEL Series specifications

Lightolier has long been a name synonymous with innovation and quality in the lighting industry. Among its impressive lineup, the Lightolier 1101FEL Series, 1101FEM Series, and 1001FEM Series stand out for their advanced features and versatile applications.

The Lightolier 1101FEL Series offers a refined combination of form and function, designed primarily for recessed lighting. One of its key features is the high efficiency of its LED technology, which significantly reduces energy consumption while delivering bright and uniform light output. This series is equipped with a sleek, low-profile design that seamlessly blends into various ceiling types, making it ideal for both residential and commercial spaces. With adjustable trim options, light direction can be customized to accentuate specific areas or artwork, enhancing the aesthetic of any environment.

Next, the Lightolier 1101FEM Series embodies a slightly different approach, focusing on both functionality and stylish design. This series is particularly notable for its enhanced dimming capabilities, providing users with complete control over ambient lighting levels to create the perfect atmosphere. The integration of smart technology allows compatibility with various home automation systems, enabling users to adjust lighting via smartphone apps or voice commands. This blend of technology and convenience makes the 1101FEM Series a favorite among tech-savvy homeowners and commercial property managers alike.

Finally, the Lightolier 1001FEM Series rounds out this impressive trio with its exceptional quality and performance. Designed for more commercial applications, it offers robust construction and a range of lumen outputs to meet diverse lighting needs. Its unique thermal management system ensures efficient heat dissipation, prolonging the life of the LED components. This series also features easy installation options and is often integrated into larger lighting networks, supporting a cohesive lighting design across vast spaces.

In conclusion, the Lightolier 1101FEL, 1101FEM, and 1001FEM Series represent the pinnacle of modern lighting solutions with their energy efficiency, smart technologies, and versatile design characteristics. Whether for residential or commercial applications, these series provide innovative lighting options tailored to meet the evolving needs of users while enhancing the ambiance and functionality of any space.