Aluratek Manual Configuration Guide for Wireless Access Point Mode

Chapter 3: Configuration

Manually configured as a Wireless Access Point ((AP Mode) (cont.)):

	Instructions	Screenshot	Go to next	Notes
			screen
6.	Numeric key		“OK” button or	You can use
	pads		press the right	the numeric/
			rotary wheel.	alphabet keypad
				on remote control
				to input the SSID,
				or you can use
				the option button
				to change the
				abc/ABC/123/~!#
				input.
7.	Numeric key		“OK” button or	You can use the
	pads		press the right	numeric/ alphabet
			rotary wheel.	keypad on remote
				control to input
				the Channel, or
				you can use the
				option button to
				change the abc/
				ABC/123/~!#
				input.
8.	“▼” button		“OK” button or	Select one of the
	(1 times) or		press the right	security schemes.
	rotate right		rotary wheel.
	rotary wheel
	clockwise.
9.	Numeric key		“OK” button or	You can use the
	pads		press the right	numeric/ alphabet
			rotary wheel.	keypad on remote
				control to input
				the WEP key, or
				you can use the
				option button to
				change the abc/
				ABC/123/~!#
				input.

Chapter 3: Configuration

Manually configured as a Wireless Access Point ((AP Mode) (cont.)):

	Instructions	Screenshot	Go to next	Notes
			screen
10.			“►” button or
			“OK” button or
			press the right
			rotary wheel.
11.			“►” button or
			“OK” button or
			press the right
			rotary wheel.
12.			“►” button or	Confirm to the
			“OK” button or	settings above.
			press the right
			rotary wheel.
13.				Apply new
				settings.
14.				The device is
				in wireless AP
				mode now.
15.				The device is
				connected to
				your network.

20 21