Safety Guidelines: Warning notices must be observed to ensure personal safety as well as that of others, and to protect the product and the connected equipment. These warning notices are accompanied by a clarification of the level of caution to be observed.
Qualified Personnel: This device/system may only be set up and operated in conjunction with this manual. Qualified personnel are only authorized to install and operate this equipment in accordance with established safety practices and standards.
Unit Repair and Excluded Liability:
•The user is responsible for all changes and repairs made to the device by the user or the user’s agent.
•All new components are to be provided by Siemens Milltronics Process Instruments.
•Restrict repair to faulty components only.
•Do not reuse faulty components.
Warning: Cardboard shipping package provides limited humidity and moisture protection. This product can only function properly and safely if it is correctly transported, stored, installed, set up, operated, and maintained.
This product is intended for use in industrial areas. Operation of this equipment in a residential area may cause interference to several frequency based communications.
Note: Always use product in accordance with specifications.
Copyright Siemens AG 2011. All Rights |
| Disclaimer of Liability |
|
|
| ||
Reserved |
|
|
|
This document is available in bound version and in |
| While we have verified the contents of this | |
electronic version. We encourage users to purchase |
| manual for agreement with the | |
authorized bound manuals, or to view electronic |
| instrumentation described, variations remain | |
versions as designed and authored by Siemens |
| possible. Thus we cannot guarantee full | |
Milltronics Process Instruments. Siemens Milltronics |
| agreement. The contents of this manual are | |
Process Instruments will not be responsible for the |
| regularly reviewed and corrections are | |
contents of partial or whole reproductions of either |
| included in subsequent editions. We welcome | |
bound or electronic versions. |
| all suggestions for improvement. | |
|
| Technical data subject to change. | |
MILLTRONICS®is a registered trademark of Siemens Milltronics Process Instruments.
Contact SMPI Technical Publications | European Authorized Representative |
at the following address: |
|
Technical Publications | Siemens AG |
Siemens AG | Industry Sector |
Siemens Milltronics Process Instruments | 76181 Karlsruhe |
1954 Technology Drive, P.O. Box 4225 | Deutschland |
Peterborough, Ontario, Canada, K9J 7B1 |
|
Email: techpubs.smpi@siemens.com |
|
•For a selection of Siemens Milltronics level measurement manuals, go to:
www.siemens.com/processautomation. Under Process Instrumentation, select Level Measurement and then go to the manual archive listed under the product family.
•For a selection of Siemens Milltronics weighing manuals, go to:
www.siemens.com/processautomation. Under Weighing Technology, select Continuous Weighing Systems and then go to the manual archive listed under the product family.
© Siemens AG 2011