Sitrans RD100 Loop Powered Meter

SITRANS RD100

SITRANS RD100 is a 2-wire loop powered, NEMA 4X enclosed remote digital display for process instrumentation.

This digital meter is easy to use with a display of 3.5 digits, 1" (2.54 cm) high. It accepts 4 to 20 mA input and operates from -40 to +80 °C (-40 to +176 °F).

SITRANS RD100 is CSA and FM Approved.

Safety Notes

Special attention must be paid to warnings and notes highlighted from the rest of the text by grey boxes.

WARNING: means that failure to observe the necessary precautions can result in death, serious injury, and/or considerable material damage.

CAUTION: means that failure to observe the necessary precautions can result in considerable material damage.

Note: means important information about the product or that part of the operating manual.

The Manual

This manual provides specifications and instructions for the operation of SITRANS RD100 Remote Display. The manual is designed to help you get the most out of your Remote Display, and it provides information on the following:

•Meter specifications

•Wiring diagrams

•Installation requirements

•Setup instructions

If you have any questions, comments, or suggestions about the manual content, please email us at techpubs.smpi@siemens.com. For the complete library of Siemens Milltronics manuals, go to www.siemens.com/processautomation.

7ML19985JU01

SITRANS RD100 – INSTRUCTION MANUAL

Page 1