Siemens SITRANS RD100 operating instructions Specifications

Page 4

Specifications

Note: Except where noted, all specifications apply to operation at +25 °C (+77 °F).

Display

• 1.0 " (25.4 mm) high LCD, numeric display range from -1000 to 1999

Enclosure

Impact-resistant glass-filled polycarbonate body

Color: gray

Impact-resistant clear polycarbonate cover: NEMA 4X, Type 4X, IP67

Mounting

Standard:

wall mount

Optional:

panel mounting kit (does not provide NEMA 4X seal to panel)

2" pipe mounting kit

Entity Parameters

Vmax= 30 V, Imax = 175 mA, Ci = 0 µF, Li = 0 µH, Pi = 1.3 W

Input

• 4 to 20 mA

Maximum Input Current

• 30 V DC

Maximum Voltage Drop

• 1 V at 20 mA

Connections

• Screw terminal block

Operating Temperature Range

-40 to +85 °C (-40 to +185 °F)

-40 to +40 °C (-40 to +104 °F) for Canadian installations

Page 2

SITRANS RD100 – INSTRUCTION MANUAL

7ML19985JU01

Image 4
Contents Page Contact Smpi Technical Publications Sitrans RD100 Loop Powered Meter Specifications Calibration Calibration RangeAccuracy Conversion RateMounting DimensionsWall Mounting Optional Panel Mounting Kit InstructionsControl loop connected to input signal PCB Calibrator connected to input signal PCBConnections Calibrator connected to display PCB DP1 DP2 DP3Setup InstallationCalibration connections Decimal point selectionLoop connections Removing display PCB from the loopRestoring display PCB to the loop Servicing display PCB outside the loop7ml19985JU01