Bard WA421 Phase Monitor, Pressure Service Ports, Typical Settings for Dual Unit Installation

Page 18

Typical Settings for Dual Unit Installation:

Unit 1: DOB set at 2 minutes, and DOM is 132 seconds

Unit 2: DOB set at 4 minutes, and DOM is 144 seconds

PHASE MONITOR

All units with three phase scroll compressors are equipped with a 3 phase line monitor to prevent compressor damage due to phase reversal.

The phase monitor in this unit is equipped with two LEDs. If the Y signal is present at the phase monitor and phases are correct the green LED will light.

If phases are reversed, the red fault LED will be lit and compressor operation is inhibited.

If a fault condition occurs, reverse two of the supply leads to the unit. Do not reverse any of the unit factory wires as damage may occur.

PRESSURE SERVICE PORTS

High and low pressure service ports are installed on all units so that the system operating pressures can be observed. A pressure table can be found later in the manual covering all models. It is imperative to match the correct pressure table to the unit by model number.

Manual 2100-218 Page 16

Page 17 Page 19
Image 18
Page 17 Page 19
Contents WA421 WA482 WA602 ModelsContents Getting Other Information and Publications Wall Mount General Information Heat Pump Wall Mount Model NomenclatureElectric Heat Table Unit Dimensions Front View Side View Back ViewElectrical Specifications Single CircuitShipping Damage GeneralDuct Work Condensate Drain FiltersFresh AIR Intake Fresh AIR DamperInstallation Instructions Wall Mounting InformationMounting the Unit Mounting Instructions Electric Heat Clearance Wall Mounting Instructions See Mounting InstructionsCommon Wall Mounting Installations Thermostat Wire Size Wiring Main PowerWiring LOW Voltage Wiring TAP RangeUnit 24V Terminal Board Start UP Service Hints Sequence of OperationCompressor Control Module Phase Monitor Pressure Service PortsTypical Settings for Dual Unit Installation Removal of FAN Shroud TroubleshootingFAN Blade Setting Dimensions Refrigerant ChargeRecommended Airflow Maximum ESP of Operation Electric Heat onlyPressure Table Cooling Optional Accessories

WA482, WA421 specifications

Bard WA482 and WA421 are high-performance air conditioning units designed for commercial and industrial applications. These models are renowned for their exceptional cooling efficiency, durability, and versatile performance, making them suitable for a variety of settings, including schools, factories, and office buildings.

One prominent feature of the Bard WA482 is its powerful cooling capacity. It has an impressive cooling output that can effectively manage indoor temperatures, even in the hottest conditions. This capability ensures optimal comfort for occupants while maintaining energy efficiency. Similarly, the Bard WA421 offers substantial cooling capacity, catering to smaller commercial spaces without compromising on performance.

Both models utilize advanced technology to enhance their operational efficiency. The units are equipped with a high-efficiency scroll compressor that minimizes energy consumption while delivering consistent cooling. This technology allows businesses to reduce their energy costs significantly, contributing to environmental sustainability.

Another significant characteristic of Bard WA482 and WA421 is their robust construction. Built with heavy-gauge galvanized steel, these units are designed to withstand tough environmental conditions. This durability ensures a long operational life, reducing the need for frequent repairs and replacements. The units are also corrosion-resistant, making them ideal for coastal or humid regions.

Efficiency is further enhanced by the inclusion of a multi-speed fan that allows for better airflow management. This feature enables the units to adjust their functioning based on the current cooling demand, optimizing energy use and minimizing noise levels. Consequently, users experience a comfortable environment without disruptive sound.

Maintenance is made simple with these models thanks to their accessible design. The units feature removable panels that provide easy access to internal components for routine servicing. This design minimizes downtime and helps maintain the overall efficiency of the system.

In terms of versatility, Bard WA482 and WA421 can be customized with various kits and options, including digital thermostats and advanced control systems. This adaptability enables users to tailor the cooling solutions to their specific needs, enhancing overall satisfaction.

In summary, Bard WA482 and WA421 stand out in the commercial air conditioning sector due to their impressive cooling capacity, energy-efficient technologies, robust construction, and ease of maintenance. These characteristics make them a reliable choice for businesses looking to maintain a comfortable and sustainable indoor environment.
Top Page Image Contents