Enjoying surround sound effects

Enjoying sound effects from all speakers

1 Press [SURROUND] several times to select the effect.

STANDARD

Sound is output as it was recorded/encoded.

Speaker output varies depending on the source.

MULTI-CHANNEL

You can enjoy sound from the front speakers, as well as the surround even when playing a 2-channel sound or non-surround sound.

MANUAL

≥The selected effect will only be displayed on the main unit.

2 While “MANUAL” is displayed, press [2, 1] and select the desired effect.

DOLBY PRO LOGIC II MOVIE

Suitable for movie software, or the one recorded in Dolby Surround.

DOLBY PRO LOGIC II MUSIC

Adds 5.1-channel effects to stereo sources.

7.1CH VIRTUAL SURROUND

You can enjoy 6.1/7.1-channel surround-like effect using 5.1-channel speakers.

SUPER SURROUND

You can enjoy sound from all speakers with stereo sources.

2CH STEREO

You can play any source in stereo. Sound will be output to the front speakers and the subwoofer only.

≥When you set to “7.1CH VIRTUAL SURROUND“, “SUPER SURROUND“ and “2CH STEREO“, “Cinema

Surround Plus“ ( 36) is not activated.

∫Adjusting speaker level during play

1Press and hold [jCH SELECT] to activate the speaker setting mode.

2Press [jCH SELECT] several times to select the speaker. Each time you press the button:

L R C RSRB* LB*LS SW



*When the optional surround back speakers are connected. L R: Front speaker

(left and right: only the balance is adjustable.) ≥Press [2, 1] to adjust the balance of the front

	speakers.
	C: Center speaker
	RS: Surround speaker (right)
	RB*: Surround back speaker (right)
	LB*: Surround back speaker (left)
	LS: Surround speaker (left)
VQT3D27	SW: Subwoofer

≥The channels not included in the playing audio will not be displayed (subwoofer is displayed even if it is not included).

3Press [3] (increase) or [4] (decrease) to adjust the speaker level for each speaker.

s6 dB to r6 dB

∫Changing the sound modes

1Press [SOUND] several times to select the mode.

≥The selected mode will only be displayed on the main unit.

2While the selected mode is displayed Press [2, 1] and select the desired setting.

EQUALIZER

You can select sound quality settings.

FLAT

Cancel (no effect is added).

HEAVY

Adds punch to rock.

CLEAR

Clarifies higher sounds.

SOFT

For background music.

SUBWOOFER LEVEL

You can adjust the amount of bass.

1 (Weakest effect) to 4 (Strongest effect)

≥The setting you make is retained, and recalled every time you play the same type of source.

H.BASS

You can enhance low-frequency sound so that heavy bass sound can be heard clearly, even if the acoustics of your room are not optimal.

≥The setting you make is retained, and recalled every time you play from the same type of source.

CENTER FOCUS

(Effective when playing audio containing center channel sound.)

You can make the sound of the center speaker seem like it is coming from within the TV.

WHISPER-MODE SURROUND

You can enhance the surround effect for low volume sound. (Convenient for late night viewing.)

≥The sound effects/modes may not be available or have no effect with some sources.

≥You may experience a reduction in sound quality when these sound effects/modes are used with some sources. If this occurs, turn the sound effects/modes off.

Enjoying sound effects from all speakers