Panasonic BTT273, SC-BTT770, SC-BTT370 owner manual Messages

Page 45

Radio

Distorted sound or noise is heard.

Adjust the position of the antenna.

≥ Use an outdoor antenna. ( 16)

A beat sound is heard.

Try to keep a certain amount of distance between the antenna and the TV.

[BTT770]

Wireless system (SH-FX71)

No power.

Ensure the AC power supply cord of the wireless system is connected properly.

The wireless link indicator is flashing.

There is no link between the main unit and the wireless system. Turn the wireless system off and then back on. Alternatively, turn the wireless system off, disconnect the AC power supply cord and then reconnect it.

The wireless link indicator does not light.

Check that the main unit is turned on, and the wireless system is turned on.

Ensure that the digital transmitter is fully inserted into the slot

of the main unit. ( 17)

The wireless link indicator keeps flashing between red and green.

There is a power supply problem. Consult the dealer.

Messages

The following messages or service numbers appear on the television or unit’s display when something unusual is detected during startup and use.

On the television

Cannot play.

You inserted an incompatible disc. (Discs recorded in PAL video, etc.)

Cannot display on this unit.

You tried to play a non-compatible image.

No disc is inserted.

The disc may be upside down.

$This operation is not available.

Some operations are unsupported by the unit. For example; jBD-Video: During playback, reverse slow-motion or

reverse frame-by-frame is not possible.

IP address is not set.

The “IP Address” in “IP Address / DNS Settings” is “---. ---.

---. ---”. Set the “IP Address”, “Subnet Mask”, and “Default Gateway”. (Select the automatic address acquisition if necessary.)

No Video

Depending on the connected iPod/iPhone, video menu may not be available on the TV. Select “ALL” on the unit’s display and operate video playback from your iPod/iPhone menu.

( 34)

Network

On the unit’s display

I can’t connect to the network.

≥ Confirm the network connection and settings. ( 17, 20, 40)

Check the operating instructions for each device and connect accordingly.

Other difficulties with playback

BD-Video or DVD-Video is not played.

Ensure the disc is for the correct BD-Video region code or

DVD-Video region number, and is not defective. ( 8)

You have set a ratings level to limit BD-Video or DVD-Video

play. Change this setting. ( 37)

Some BD-Video can only be output with HDMI.

I cannot play back BD-Live.

≥ The SD card is write-protected. ( 9)

Confirm that this unit is connected to the broadband Internet.

( 17)

≥ Confirm the “BD-Live Internet Access” settings. ( 37)

≥ Confirm an SD Card is inserted into the SD Card slot. ( 22)

Alternative soundtrack and subtitles cannot be selected.

The languages are not recorded on the disc.

You may not be able to use the playback menu to change the soundtrack and subtitles on some discs. Use the disc’s

menus to make changes. ( 25)

F99

The unit fails to operate properly. Press [POWER Í/I] on the main unit to switch the unit to standby for 3 seconds. Now press [POWER Í/I] on the main unit again to turn the unit on.

U59

The unit is hot.

The unit switches to standby for safety reasons. Wait for about 30 minutes until the message disappears.

Select a position with good ventilation when installing the unit. Do not block the ventilation hole on the rear and side of the unit.

HDMI ONLY

Some BD-Video discs can only be output with HDMI.

NET

While connecting to a network.

Reference

Angle cannot be changed.

 

≥ Angles can only be changed during scenes where different

VQT3D27

angles are recorded.

45

 

 

 

Image 45
Contents Illustration shows the image of the unit SC-BTT770 Model No. SC-BTT770Following Applies only in the U.S.A. FCC Note For wireless systemFollowing Applies in the U.S.A. and Canada Following Applies only in CanadaPlacement UnitInside of product Table of contents Accessory Remote control TV operation buttons35/Select audio ≥ Automatic power-down function Standby/on switch Power Í/IMain unit Front Main unit RearPlayable discs/Cards Type detail Playable contents ExamplesUnit and media care Using the remote controlPreparing the speakers Assembling the speakersPreparation Preparing cables and making connection Speaker cable sticker supplied Connector ColorPreventing the speakers from falling  Upgrade your system to 7.1-channel System Wireless systemSetup example PositioningConnections Connection with the wireless system SH-FX71Speaker cable connection Connection with the main unit  Connection to a TVConnection for the standard picture and audio Connection for the better audioWhen the Hdmi terminal on the TV is not labeled Hdmi ARC When the Hdmi terminal on the TV is labeled Hdmi ARCHdmi cable Optical digital audio cable not suppliedUsing an indoor antenna When the connecting devices do not have an Hdmi terminalUsing an outdoor antenna Connection with Set Top Box, etcBTT770 Digital transmitter connection Wireless LAN connectionConnection to a broadband network LAN cable connectionBTT770 Preparing the wireless system AC power supply cord connectionPress Power C I, B Í on the wireless system Unit on/off button Power C I, B ÍPress OK several times to finish the Easy setup Easy setupEasy setup assists you to make necessary settings PreparationWired connection Network Easy SettingWireless connection Search for wireless networkWhen you experience problems with settings Reprogramming the remote controlSelecting the source by the remote control Firmware updatesInserting or removing media Button SourcePress Í to turn on the unit Home menuPress 3, 4, 2, 1 to select the item Press OKEnjoying surround sound effects Adjusting speaker level during playChanging the sound modes Press Surround several times to select the effectPlaying video contents Enjoying BD-Live or picture-in-picture in BD-Video Useful functionsEnjoying BD-Live discs with Internet Playing picture-in-pictureEnjoying 3D video 3D settingsTo show the still picture properties Playing still picturesPress 3, 4 to select the folder and press OK Press 3, 4, 2, 1 to select the still picture and press OKPlaying music Listening to the Radio Presetting stations manuallyPlaying a track in another FolderEnjoying TV with unit’s speakers Surround sound effectsSound modes Automatic input switching Power on link Setting the audio linkLinked operations with Speaker controlEasy control only with Viera remote control Using the iPod/iPhonePower off link IPod/iPhone ConnectionEnjoy music/video IPod/iPhone PlaybackPress 3, 4 to select an item and press OK Basic controlsEnjoying Enjoy photosOther methods of playback Press Display Playback menuPlay VideoAudio Setup menu DiscPress 3, 4, 2, 1 to select the option and press OK Display TV / Device Connection 3D SettingsTV Aspect Hdmi ConnectionOthers NetworkSpeaker settings Adjusting speaker levelWhen using the 7.1ch speaker system Attaching to a wall Speaker installation optionTo avoid speaker dropping   Drive a screw not supplied into the wallPower Troubleshooting guideGeneral operation DisplaysIPod/iPhone operation TV screen and video SoundMessages Display languages list Language code listReference BTT770 BTT370 Hdmi AV SpecificationsFile format File Extension ReferenceJpeg Limited Warranty Limits And Exclusions Mail-In ServicePanasonic Exchange Center George McVay Drive Suite B For hearing or speech impaired TTY users, TTYPanasonic Canada Inc Limited Warranty Only for CanadaLAN Index