Lincoln Electric S22693-121 manual Contact TIP Size, Wire Straighteners

Page 11

A-4

INSTALLATION

A-4

 

 

 

CONTACT TIP SIZE

Contact tips are available in standard sizes to match the wire specifications of the welding torch (.035, .045,

.052 and .062 inches). Some Tandem applications may require greater arc stability than others. If arc instability due to electrical transfer through the contact tip is encountered, an undersized contact tip may be required. For .035" dia. wire use a .030" contact tip and for .045" dia. use a .040" contact tip.

WIRE STRAIGHTENERS

Torch goosenecks' have a 22-degree bend for joint accessibility. The bend provides a wire cast condition- ing that forces the welding wire against the contact tip for positive electrical contact. If selected wire packag- ing counters the effect of the bent goosenecks a wire straightener (K1733-1) placed at the wire feeder may be required to re-establish a useable cast to the wire.

800 AMP TANDEM MIG TORCH

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Tandem MIG 800 Amperage Welding Torch February California Proposition 65 Warnings SafetyElectric Shock can kill Cylinder may explode if damaged Précautions DE Sûreté Thank You Table of Contents Tandem MIG Torch Cable Length Availability InstallationTorch Mounting Liner InstallationGeneral Description Contact TIP Selection Contact TIP and Diffuser InstallationTorch Connection to Wire Feeder Contact TIP Size Wire StraightenersOperation ANTI-SPATTER Spray Nozzle Reaming StationsGooseneck Replacement MaintenanceContact TIP Replacement Liner ReplacementContact TIP Alignment L10430-1 Torch Alignment Tool Alignment ProcedureS22693-XXX MIG 800 amp Torch Maintenance Maintenance HOW to USE Troubleshooting Guide TroubleshootingDrive rolls turn, but wire will AMP Tandem MIG Torch AMP Tandem MIG Torch Precaucion Warnung
Top Page Image Contents