Lincoln Electric S22693-121 manual HOW to USE Troubleshooting Guide

Page 19

D-1

TROUBLESHOOTING

D-1

 

 

 

HOW TO USE TROUBLESHOOTING GUIDE

WARNING

Service and Repair should only be performed by Lincoln Electric Factory Trained Personnel. Unauthorized repairs performed on this equipment may result in danger to the technician and machine operator and will invalidate your factory warranty. For your safety and to avoid Electrical Shock, please observe all safety notes and precautions detailed throughout this manual.

__________________________________________________________________________

This Troubleshooting Guide is provided to help you locate and repair possible machine malfunctions. Simply follow the three-step procedure listed below.

Step 1. LOCATE PROBLEM (SYMPTOM).

Look under the column labeled “PROBLEM (SYMP- TOMS)”. This column describes possible symptoms that the machine may exhibit. Find the listing that best describes the symptom that the machine is exhibiting.

Step 2. POSSIBLE CAUSE.

The second column labeled “POSSIBLE CAUSE” lists the obvious external possibilities that may contribute to the machine symptom.

Step 3. RECOMMENDED COURSE OF ACTION This column provides a course of action for the Possible Cause, generally it states to contact your local Lincoln Authorized Field Service Facility.

If you do not understand or are unable to perform the Recommended Course of Action safely, contact your local Lincoln Authorized Field Service Facility.

CAUTION

If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.

800 AMP TANDEM MIG TORCH

Image 19
Contents Tandem MIG 800 Amperage Welding Torch February California Proposition 65 Warnings SafetyElectric Shock can kill Cylinder may explode if damaged Précautions DE Sûreté Thank You Table of Contents Tandem MIG Torch Cable Length Availability InstallationGeneral Description Liner InstallationTorch Mounting Torch Connection to Wire Feeder Contact TIP and Diffuser InstallationContact TIP Selection Contact TIP Size Wire StraightenersOperation ANTI-SPATTER Spray Nozzle Reaming StationsGooseneck Replacement MaintenanceContact TIP Replacement Liner ReplacementContact TIP Alignment L10430-1 Torch Alignment Tool Alignment ProcedureS22693-XXX MIG 800 amp Torch Maintenance Maintenance HOW to USE Troubleshooting Guide TroubleshootingDrive rolls turn, but wire will AMP Tandem MIG Torch AMP Tandem MIG Torch Precaucion Warnung