Lincoln Electric IM10006 Installation, Technical Specifications Plasma, Voltage, Circuit Breaker

A-1 INSTALLATION A-1

TECHNICAL SPECIFICATIONS - PLASMA 20

INPUT - SINGLE PHASE

Standard Voltage

115/1/50/60Hz (15 Amp Branch)

115/1/50/60Hz (20 Amp Branch with 20 Amp Plug*)

1Ø Input Current at Rated Output

115 V: 20A @ 50%

115 V: 26A @ 40%

RATED OUTPUT

					Duty Cycle					AMPS
		50% on 115V (15 Amp Branch)								15 A
40% on 115V (20 Amp Branch with 20 Amp Plug*)										20 A
							OUTPUT
		Current					Open Circuit			Pilot Current
		Range					Voltage
		10-20 Amps					310 VDC			17 Amps
	REQUIRED AIR FLOW					RATE		REQUIRED AIR		INLET PRESSURE
			3.5 cu. ft./min.							72.5 to 150 PSI
				(100L/min.)					( 5 Bar TO 10.3 Bar)
					RECOMMEND INPUT WIRE AND FUSE SIZES
					For all plasma cutting applications
					Based on U.S. National Electrical Code
					Ambient Temperature 30oC or Less
Output		AC Input					Maximum
		Voltage					Time-Delay			Type SJT or Hard Usage
		at			Plug Size		Circuit Breaker			Input Cord
		50/60					or Fuse Size
		Hertz
20 A		115V-1Ø					20 AMPS
					5-20P*					3 Conductor, #14 AWG
15 A		115V-1Ø			5-15P		15 Amps

PHYSICAL DIMENSIONS

Height

12in.

305 mm

Width

6in.

152 mm

Depth

16in.

406mm

Weight

Including

Torch Cable

21lbs.

9.5 kg.

*5-20P plug must comply with the standard for attachment plugs and receptacles, UL498.

PLASMA 20