Friedrich MW30C3G, MW36C3G, MR30C3G, MR36C3G operation manual Timer Operation

Page 9

TIMER OPERATION

Before using the timer function, be sure that the Remote Controller is set to the correct current time (☞ P. 5).

To Use the ON timer or OFF timer

1

Press the START/STOP button (Fig. 6 P)

(if the unit is already operating, proceed to step 2).

 

The indoor unit’s OPERATION Indicator Lamp (red) (Fig. 3 5) will light.

2

Press the TIMER MODE button (Fig. 6 M) to select the

OFF timer or ON timer operation.

 

Each time the button is pressed the timer function changes in the following

 

order:

 

 

 

 

 

 

 

 

 

▲ CANCEL

▲ OFF

 

▲ ON

 

 

 

 

 

 

 

 

 

 

 

 

PROGRAM (OFF → ON, OFF ← ON) ▲

 

 

 

 

 

 

 

The indoor unit’s green TIMER Indicator Lamp (Fig. 3 6) will light.

3

Use the TIMER SET buttons (Fig. 6 N) to adjust the

desired OFF time or ON time.

 

 

 

 

Set the time while the time display is flashing (the flashing will continue for about five seconds).

button: Press to advance the time. button: Press to reverse the time.

To Cancel the Timer

Use the TIMER button to select “CANCEL”. The air conditioner will return to normal opera- tion.

To Change the Timer Settings

Perform steps 2 and 3.

To Stop Air Conditioner Operation while the Timer is Operating

Press the START/STOP button.

To Change Operating Conditions

If you wish to change operating conditions (Mode, Fan Speed, Thermostat Setting, SUPER QUIET mode), after making the timer setting wait until the entire display reappears, then press the appropriate buttons to change the operating condition desired.

About five seconds later, the entire display will reappear.

To Use the Program timer

1

Press the START/STOP button (Fig. 6 P).

(if the unit is already operating, proceed to step 2).

 

The indoor unit’s OPERATION Indicator Lamp (red) (Fig. 3 5) will light.

2

Set the desired times for OFF timer and ON timer.

See the section “To Use the ON timer or OFF timer” to set the desired mode

 

and times.

 

About three seconds later, the entire display will reappear.

 

The indoor unit’s TIMER Indicator Lamp (green) (Fig. 3 6) will light.

3

Press the TIMER MODE button (Fig. 6 M) to select the

PROGRAM timer operation (OFF

 

ON or OFF

 

ON

 

 

will display).

The display will alternately show “OFF timer” and “ON timer”, then change to show the time setting for the operation to occur first.

● The program timer will begin operation. (If the ON timer has been selected to operate first, the unit will stop operating at this point.)

About five seconds later, the entire display will reappear.

About the Program timer

●The program timer allows you to integrate OFF timer and ON timer operations in a single sequence. The sequence can involve one transition from OFF timer to ON timer, or from ON timer to OFF timer, within a twenty-four hour period.

●The first timer function to operate will be the one set nearest to the current time. The order of operation is indicated by the arrow in the Remote Controller’s Display (OFF → ON, or OFF ← ON).

●One example of Program timer use might be to have the air conditioner automatically stop (OFF timer) after you go to sleep, then start (ON timer) automatically in the morn- ing before you arise.

To Cancel the Timer

Use the TIMER MODE button to select “CAN- CEL”.

The air conditioner will return to normal opera- tion.

To Change the Timer Settings

1.Follow the instructions given in the section “To Use the ON Timer or OFF Timer” to select the timer setting you wish to change.

2.Press the TIMER MODE button to select either OFF ON or OFF ON.

To Stop Air Conditioner Operation while the Timer is Operating

Press the START/STOP button.

To Change Operating Conditions

If you wish to change operating conditions (Mode, Fan Speed, Thermostat Setting, SUPER QUIET mode), after making the timer setting wait until the entire display reappears, then press the appropriate buttons to change the operating condition desired.

En-8

9315345394_OM.indb 8

9/30/2010 2:44:24 PM

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Español Français English Operating Manual Mode D’EMPLOI Manual DE FuncionamientoSafety Precautions ContentsInverter Removable Open Panel Features and FunctionsManual Auto Name of PartsEn-4 Preparation Operation To Select Mode Operation Press the START/STOP button PTo Set the Thermostat Press the SET TEMP. button K To Set the Fan Speed Press the FAN Control button OAbout Mode Operation To Stop Operation Press the START/STOP button PAbout Auto Changeover Operation Timer Operation To Change the Timer Settings Sleep Timer OperationAbout the Sleep Timer Manual Auto OperationRemote Controller’s display does not change Adjusting the Direction of AIR CirculationSwing Operation To select Swing Operation Press the Swing button SAbout Swing Operation Cleaning and Care Symptom Problem TroubleshootingEvent of Power Interruption Operating TipsAuto Restart Temperature and Humidity Range SpecificationCooling Mode Dry Mode Outdoor temperature Indoor temperature9315345394OM.indb 30/2010 24425 PM 9315345394OM.indb 30/2010 24434 PM 9315345394OM.indb 30/2010 24434 PM 9315345394OM.indb 30/2010 24434 PM

MR36C3G, MR30C3G, MW30C3G, MW36C3G specifications

Friedrich air conditioners are renowned for their innovative features and reliable performance, especially in the models MW30C3G, MR36C3G, MR30C3G, and MW36C3G. These products cater to various cooling needs, providing ideal solutions for both home and commercial settings.

The MW30C3G window air conditioner, for instance, boasts an impressive cooling capacity that effectively tackles high temperatures, making it suitable for larger rooms. It comes equipped with a programmable timer and a remote control, offering convenience and energy management for users. The multi-speed fan settings allow for customizable airflow, ensuring a comfortable environment at all times.

On the other hand, the MR36C3G model is a versatile mini-split system designed for energy efficiency and performance. It features an inverter technology that adjusts the compressor speed according to the cooling demand, resulting in lower energy consumption and quieter operation. Additionally, the MR36C3G includes a smart sensor that detects occupancy and automatically adjusts the temperature, enhancing comfort and efficiency.

The MR30C3G air conditioner is known for its sleek design and powerful cooling performance. With multiple cooling modes and dehumidification functionality, it can maintain a comfortable indoor climate even during high humidity periods. Its robust build ensures durability, making it an excellent long-term investment for homeowners and business owners alike.

Lastly, the MW36C3G model is characterized by its compact size and high energy efficiency rating. It is equipped with features like a washable filter, which simplifies maintenance and helps maintain clean air quality. The user-friendly interface allows for easy adjustments, while the quiet operation ensures minimal disruption in living spaces.

Collectively, those models from Friedrich represent a blend of modern technology and practicality. Their emphasis on energy efficiency, user comfort, and design will appeal to a variety of consumers seeking reliable cooling solutions. Whether opting for a window unit or a mini-split system, users can trust Friedrich’s commitment to quality and performance.
Top Page Image Contents