Friedrich MR36C3G, MW36C3G, MW30C3G, MR30C3G Adjusting the Direction of AIR Circulation

Page 11

ADJUSTING THE DIRECTION OF AIR CIRCULATION

●Adjust the up, down, left, and right AIR directions with the AIR DIRECTION buttons on the Remote Controller.

●Use the AIR DIRECTION buttons after the Indoor Unit has started operating and the airflow-direction louvers have stopped mov- ing.

Vertical Air Direction Adjustment

Press the SET button (Vertical) (Fig. 6 Q).

Each time the button is pressed, the air direction range will change as follows:

DANGER!

● Never place fingers or foreign objects inside

the outlet ports, since the internal fan oper-

ates at high speed and could cause personal

injury.

1 2 3 4

Types of Air flow Direction Setting: 1,2,3 : During Cooling/Dry modes 1,2,3,4,5,6 :During Fan mode

The Remote Controller’s display does not change.

5 6

1

2

3

4

5

6

● Always use the Remote Controller’s

SET button to adjust the vertical airflow

louvers. Attempting to move them manu-

ally could result in improper operation; in

this case, stop operation and restart. The

louvers should begin to operate properly

again.

● During Cooling and Dry modes, do not

move the vertical air direction louvers

outside their proper operating range for

the mode (1 - 3) and into the fan region

(4 - 6); using the louvers in the fan re-

gion will cause moisture to condense near

the air outlet, and water may drop onto

●Use the air direction adjustments within the ranges shown above.

●The vertical airflow direction is set automatically as shown, in accordance with the type of operation selected.

During Cooling/Dry/Fan mode :

Horizontal flow 1

●During AUTO mode operation, for the first minute after beginning operation, airflow will be horizontal 1; the air direction cannot be adjusted during this period.

●Direction 1 2

Only the direction of the Air Flow Direction Louver changes; the direction of the Power Diffuser does not change.

Horizontal Air Direction Adjustment

Press the SET button (Horizontal)(Fig. 6 R).

●Each time the button is pressed, the air direction range will change as follows:

1 2 3 4 5

The remote controller’s display does not change.

the floor. During the Cooling/Dry modes,

if the louvers are operated outside the

range 1 - 3 for more than 20 minutes,

they will be automatically returned to the

3 range.

● When used in a room with infants,

children, elderly or sick persons, the air

direction and room temperature should

be considered carefully when making

settings.

9315345394_OM.indb 10

En-10

9/30/2010 2:44:24 PM

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Español Français English Operating Manual Mode D’EMPLOI Manual DE FuncionamientoSafety Precautions ContentsInverter Removable Open Panel Features and FunctionsManual Auto Name of PartsEn-4 Preparation To Set the Fan Speed Press the FAN Control button O To Select Mode Operation Press the START/STOP button POperation To Set the Thermostat Press the SET TEMP. button KAbout Auto Changeover Operation About Mode OperationTo Stop Operation Press the START/STOP button P Timer Operation Manual Auto Operation Sleep Timer OperationTo Change the Timer Settings About the Sleep TimerRemote Controller’s display does not change Adjusting the Direction of AIR CirculationAbout Swing Operation Swing OperationTo select Swing Operation Press the Swing button S Cleaning and Care Symptom Problem TroubleshootingAuto Restart Event of Power InterruptionOperating Tips Indoor temperature SpecificationTemperature and Humidity Range Cooling Mode Dry Mode Outdoor temperature9315345394OM.indb 30/2010 24425 PM 9315345394OM.indb 30/2010 24434 PM 9315345394OM.indb 30/2010 24434 PM 9315345394OM.indb 30/2010 24434 PM

MR36C3G, MR30C3G, MW30C3G, MW36C3G specifications

Friedrich air conditioners are renowned for their innovative features and reliable performance, especially in the models MW30C3G, MR36C3G, MR30C3G, and MW36C3G. These products cater to various cooling needs, providing ideal solutions for both home and commercial settings.

The MW30C3G window air conditioner, for instance, boasts an impressive cooling capacity that effectively tackles high temperatures, making it suitable for larger rooms. It comes equipped with a programmable timer and a remote control, offering convenience and energy management for users. The multi-speed fan settings allow for customizable airflow, ensuring a comfortable environment at all times.

On the other hand, the MR36C3G model is a versatile mini-split system designed for energy efficiency and performance. It features an inverter technology that adjusts the compressor speed according to the cooling demand, resulting in lower energy consumption and quieter operation. Additionally, the MR36C3G includes a smart sensor that detects occupancy and automatically adjusts the temperature, enhancing comfort and efficiency.

The MR30C3G air conditioner is known for its sleek design and powerful cooling performance. With multiple cooling modes and dehumidification functionality, it can maintain a comfortable indoor climate even during high humidity periods. Its robust build ensures durability, making it an excellent long-term investment for homeowners and business owners alike.

Lastly, the MW36C3G model is characterized by its compact size and high energy efficiency rating. It is equipped with features like a washable filter, which simplifies maintenance and helps maintain clean air quality. The user-friendly interface allows for easy adjustments, while the quiet operation ensures minimal disruption in living spaces.

Collectively, those models from Friedrich represent a blend of modern technology and practicality. Their emphasis on energy efficiency, user comfort, and design will appeal to a variety of consumers seeking reliable cooling solutions. Whether opting for a window unit or a mini-split system, users can trust Friedrich’s commitment to quality and performance.
Top Page Image Contents