Advanced operations
See page 22 for button locations.
4 Press ENTER.
Example:
5 Press Cursor Y/5 to change the setting.
6 Press ENTER.
The current VFP settings appear again.
7 Repeat steps 3 to 6 to adjust other parameters.
8 Press VFP.
NOTE
•Although the setting display disappears in the middle of the procedure, the setting at that time will be stored.
Program Playback
7While stopped
1 Press PLAY MODE repeatedly until program window appears on the TV screen.
2 Follow the instructions that appears on the TV screen to program the desired chapters/tracks.
•For details on using the number buttons, see “How to use the number buttons” (A pg. 20).
•The content’s numbers that you have to specify for
programming varies depending on the disc type:
• | DVD VIDEO: | Titles and chapters |
• | VCD, SVCD, CD: | Tracks |
•DVD AUDIO, MP3, WMA:
Groups and tracks
•Before you program the tracks in bonus group on a DVD
AUDIO, perform the procedure of “Playing back a bonus group” (A pg. 21) to turn off the BONUS indicator on the display window.
•You can specify the chapters/tracks whose number is up to 99.
•(For CD, SVCD or VCD) When the total playback time exceeds 99 minutes 59 seconds,
To clear the programs one by one from the last entered number
Press CANCEL repeatedly.
To clear all programs
Press 7.
You can also clear the program by turning off the system.
3 Press 3 (play button).
If all of the programmed tracks/files have been played back, playback stops and the program window appears again. Note that program setting remains.
To check the program contents
During playback, press 7. Playback stops and the program window appears.
To quit the Program mode
While stopped, press PLAY MODE repeatedly until both program
window and 
disappear from the TV screen.
NOTE
•The Resume function cannot be used with Program Playback.
•Program Playback may not work for some discs.
30
