JVC SP-THS5S, SP-PWS51 Operating the VCR, Operating external components with the remote control

Operating external components with the remote control

See page 12 for button locations.

Operating the VCR

7To set the manufacturer’s code

1 Slide the remote control mode selector to VCR.

2 Press and hold F VCR.

Keep the button pressed until step 4 is finished.

3 Press ENTER.

4 Press number buttons (1-9, 0) to enter the manufacturer’s code (2 digits).

Examples:

For a Panasonic VCR:

Press 2, then 1.

For an Philips VCR:

Press 0, then 5.

Manufac-	Code	Manufac-	Code
turer		turer
JVC	01	Nokia	16
Aiwa	02, 20	Nordmende	17	– 19, 31
Bell+Howell	03, 16	Orion	20
Blaupunkt	04	Panasonic	21
CGM	03, 05, 16	Philips	05, 22
Daewoo	34	Phonola	05
Digtal	05	Saba	17	– 19, 23, 31
Fisher	03, 16	Samsung	24, 25
G.E.	06	Sanyo	03, 16
Grundig	07	Sharp	26, 27
Hitachi	08, 09	Siemens	07
Loewe	05, 10, 11	Sony	28	– 30, 35
Magnavox	04, 05	Telefunken	17	– 19, 31, 32
Mitsubishi	12 – 15	Toshiba	33

5 Release F VCR.

If there is more than one code listed for your brand, try each one until you enter the correct one.

7Operation

Aim the remote control at the VCR.

IMPORTANT

Before using the remote control to operate a VCR; Set the remote control mode selector to VCR.

The following buttons are available:

FVCR: Turns VCR on and off. 3 (play button): Starts playback.

7 :	Stops operation.
8 :	Pauses playback.

y: Fast forwards video tape.

1: Rewinds video tape.

REC: Press this button together with 3 (play button) to start recording or together with 8 to pause recording.

CHANNEL +/–: Changes the TV channels on the VCR.

13