JVC SP-THS5F, SP-PWS51, XV-THS51 Resume Playback, Selecting a view angle, Selecting the subtitle

Advanced operations

See page 22 for button locations.

7For MP3/WMA:

During playback or while stopped For JPEG/MPEG4:

While stopped

1 Press Cursor 3/2/Y/5 to select the desired group/track/file.

•For MP3/WMA, playback starts from the selected track.

2 Press 3 (play button) or ENTER.

•Track playback/slide-show starts from the selected track/ file.

•When you press ENTER for JPEG, only the selected file is played back.

NOTE

•During playback, you can locate the desired track/file by pressing x/4or Cursor 5/Y.

•You can also check playback information on the display window. (A pg. 19)

•Some group, track and file names may not be displayed correctly depending on recording conditions.

•The order of groups, tracks and files may be displayed differently from the order displayed on your personal computer.

Resume Playback

When Resume Playback is set to

“ON” (A pg. 36) and you stop playback by the following

operations, the position where playback has been stopped is stored. (“RESUME” appears on the display window.)

•Turning off the power (A pg. 14)

•Pressing 7once

•Changing the source (A pg. 15)

To start playback from the stored position

Press 3(play button) or DVD.

•There may be a case where 3(play button) does not work after changing the source.

To clear the stored position

Press 7again or open the disc tray.

Selecting a view angle

7During playback of a disc containing multi-view

angles

When using the ANGLE button:

1 Press ANGLE.

Example:

The first view angle is selected out of 3 view angles recorded.

2 Press ANGLE repeatedly or press Cursor Y/5 to select the desired view angle.

When using the on-screen bar:

1 Press ON SCREEN twice.

The on-screen bar appears on the TV screen.

2 Press Cursor 3/2 to highlight . 3 Press ENTER.

4 Press Cursor Y/5to select the desired view angle.

5 Press ENTER.

6 Press ON SCREEN.

The on-screen bar disappears.

NOTE

•During DVD AUDIO playback, this feature is available only for the video part.

Selecting the subtitle

7During playback of a disc containing

subtitles in several languages

When using the SUBTITLE button:

1 Press SUBTITLE.

Example (DVD VIDEO):

“ENGLISH” is selected out of 3 subtitle languages recorded.

•Each time you press SUBTITLE, subtitle appears and disappears alternately.

2 Press Cursor Y/5to select the desired subtitle.

For SVCD

•An SVCD can contain up to four subtitles. Pressing SUBTITLE changes the subtitles regardless of whether the subtitles are recorded or not. (Subtitles will not change if no subtitle is recorded.)

27