Lincoln Electric IM856 manual Recommended Equipment, Stick, Wire Feed, Tig, Remote Output Control

Page 23

C-2

ACCESSORIES

C-2

 

 

 

RECOMMENDED EQUIPMENT

STICK

K704 Accessory Kit which includes:

Electrode Holder & Cable

Work Clamp & Cable

Headshield

WIRE FEED

K449 LN-25- Includes internal contactor for across the arc operation (no control cable). Provides coldelectrode until gun trigger is pressed. Includes gas solenoid.

Magnum Gun and Magnum Gun Connector Kit are required for gas-shielded welding. Innershield Gun is required for gasless welding.

K126-2Magnum 350 Innershield Gun

K1802-1Magnum 300 MIG Gun (for LN-25)

K470-2Magnum 300 MIG Gun (for LN-15)

K466-10Connector Kit (for LN-15, K470-2)

K1500-1Gun Receiver Bushing (for LN-15 & K126-2) K1870-1LN-15 Across the Arc Model

TIG

MagnumTIG Torch

K1783-9- TIG Torch

Magnum Parts Kit and Argon Gas

K930-2 TIG Module - Provides high frequency and shield- ing gas control.for AC and DC GTAW (TIG) welding applica- tions. Its compact case is designed foe easy carrying, com- plete with a handle. High frequency bypass is built in Requires K938-1Contactor Kit, K936-3Control Cable, and K814 Arc Start Switch.

K938-1Contactor Kit - For use with TIG Module, Provides a coldelectrode until the triggering device (Arc Start Switch) is pressed.

K936-3Control Cable - Connects TIG Module to RANGER GXT.

Optional TIG Equipment:

K939-1Docking Kit - For Mounting the K930-2 TIG Module on top of the RANGER GXT.

K937-45Control Cable Extension - Allows TIG Module to be operated at distances up to 200ft. from the power source. Available in 45ft. (13.7m).

K844-1Water Valve Kit - For use with water cooled TIG torch, Installs inside of TIG Module.

K963-2Hand Amptrol

K870 Foot Amptrol

REMOTE OUTPUT CONTROL

(See Operations Section for reference)

The Ranger GXT is equipped with a 6-pin connector. The 6- pin connector is for connecting the K857 or K857-1Remote Control (optional) or for TIG welding, the K870 Foot Amptrol or the K963-2 Hand Amptrol. When remote con- trol is used set the LOCAL / REMOTE switch in the "REMOTE" position.

Plasma

K1580-1Pro-Cut 55

(Requires Full KVA Adapter K1816-1)

RANGER GXT

Image 23
Contents Ranger GXT California Proposition 65 Warnings SafetyElectric Shock can kill Iii Welding Sparks can cause fire or explosionSûreté Pour Soudage a L’Arc Précautions DE SûretéThank You Table of Contents Welding Output InstallationAuxiliary Power Height Width Depth WeightTowing Safety PrecautionsMachine Grounding Spark ArresterGasoline PRE-OPERATION ServiceBattery Connections Angle of Operation Additional Safety PrecautionsWelding Output Cables Total Combined Length of Electrode and Work CablesStacking Connection of Lincoln Electric Wire FeedersInstructions Location / VentilationMotor Starting Auxiliary Power120/240 Volt Dual Voltage Receptacle Duplex ReceptaclesType Common Electrical Devices Possible Concerns Electrical Device USE with the Ranger GXTStandby Power Connections Auxiliary Power While WeldingSimultaneous Welding and Power Connection of Ranger GXT to Premises Wiring Welder Controls Function and Operation Engine SwitchOperation General DescriptionRanger GXT Approximate Fuel Consumption Polarity Switch PIN ConnectorLocal / Remote Control Switch Stopping the Engine STARTING/SHUTDOWN InstructionsBREAK-IN Period Starting the EngineTIG Constant Current Welding Wire Feed Welding Processes Constant VoltageWelding Process Stick Constant Current WeldingStick Auto K857 25 ft.7.5m or K857-1100 ft.30.4m AccessoriesK1745-1 GAS Cylinder Holder TIG Wire FeedRecommended Equipment StickEngine OIL Change MaintenanceSafety Precautions Routine MaintenanceOIL Filter Change AIR Cleaner and Other MaintenanceEngine Adjustments HOW to USE Troubleshooting Guide TroubleshootingTroubleshooting Troubleshooting Diagrams PIN Connector M20512 Ranger GXT Precaucion Warnung