Lincoln Electric IM843-C manual Wire Feed Options, Wire Feed Module K623-1 Provides constant

Page 17

C-2

ACCESSORIES

C-2

WIRE FEED OPTIONS

Wire Feed Module (K623-1) - Provides constant

voltage (CV) output with improved arc stability for Innershield welding. Excellent for MIG welding. Recommended wire feeders are the LN-7, LN-23P and LN-25. (Factory installed on the K1643-6).

LN-25 Wire Feeder (K449)-Portable CC/CV unit for flux-cored and MIG welding. Includes Gas Solenoid & Internal Contactor. Requires Wire Feed Module.

Remote Voltage Control Kit for LN-25 (K444-2)Provides 25 ft. (7.5m) of remote output voltage control and output jumper (2 and 4) for machines having 14 pin MS-type connector.

Magnum® 350 Innershield Gun (for LN-25)(K126-2)- For self-shielded wire with 15 ft. (4.5m) cable. For

.062-3/32” (1.6-2.8mm) wire.

Magnum® 300 MIG Gun for LN-25 K1802-1 - With 15 ft. (4.5m) cable. For .035”-.045”(0.9-1.2mm) gas shielded (Includes Connector Kit).

LN-23P Wire Feeder (K316L-1)-Portable CV unit for Innershield pipe welding. Control cable operates con- tactor inside Wire Feed Module for “cold” electrode.

Requires LN-23P Adapter Kit (K350-1) and Gun and Cable Assembly.

LN-23P Adapter Kit (K350-1)-Required to adapt LN- 23P to any Lincoln power source. Makes 14 pin con- nection at power source.

Magnum® 250 Innershield Gun (for LN-23P) (K355-10)-For lighter weight and easier handling. Rated 250 amps, 60% duty cycle. For .068 through 5/64” (1.7 through 2.0 mm) Innershield wire and includes reduced speed switch. For pipewelding, an M11476 62° gun tube is recommended.

62° gun tube for PipeWelding (KP1909-1)- Recommended modification for K355-X or K345-X guns with 90° gun tubes. Compatible with K126-1,-2K264-8 and K355-10.

Magnum Spool Gun (K487-25)-Hand held semiauto-

matic wire feeder requires SG Control Module. 25 ft. (7.6m)length.

SG Control Module (K488) (For Magnum Spool

Gun) -The interface between the power source and the spool gun. Provides control of wire speed and gas flow.

Input Cable (K691-10) ( For SG Control Module) - For Lincoln engine drives with 14-pinMS-type con- nection provides separate 115V NEMA receptacle and output stud connections. 10 ft. (3.1m)length.

CLASSIC 300D KUBOTA

Image 17
Contents 300D Kubota California Proposition 65 Warnings SafetyElectric Shock can kill Iii Welding and Cutting Sparks can Cause fire or explosionSûreté Pour Soudage a LʼArc Précautions DE SûretéThank You Table of Contents Description Rated DC Output Model Height Width Depth WeightDC Current Range CycleDesign Features InstallationGeneral Description Rated Output Duty CyclePRE-OPERATION Installation Vehicle Mounting PRE-OPERATION ServicePolarity Control and Cable Sizes OIL FuelBattery Acid can burn eyes and skin 5INSTALLATIONA-5Gases from Battery can explode Engine BREAK-IN OperationEngine Operation Control of Welding Current Welder OperationIdler Operation Auxiliary PowerGeneral Options AccessoriesStick Options TIG OptionsWire Feed Module K623-1 Provides constant Wire Feed OptionsMaintenance MaintenanceNameplates Idler MaintenancePurging AIR from Fuel System Kubota V2203M Engine Before doing electrical work, disconnect the bat- teryEngine Service Gfci Receptacle Testing and Reset Ting Procedure HOW to USE Troubleshooting Guide TroubleshootingContact your local Lincoln Authorized Field Service FacilityClosed Electronic Idler Troubleshooting GuideSensing PCB Engine Repair Facility Irregular running of the engine Air mixed in the fuel system Troubleshooting Engine Protection Light not com Broken Light Bulb Enhanced Diagram DiagramsDiagrams Diagrams Diagrams Diagrams Kubota Aviso DE Keep your head out of fumes Turn power off before servicing