Wilton SX Troubleshooting Machine Fault & Operating Problems, Ordering Replacement Parts

Troubleshooting – Machine Fault & Operating Problems

Problem	Probable Cause	Solution
	Electrical power supply	Check: the phases; the cables; the plug; the socket.
		Also check that the motor connections are in place.
	Transformer	Check that the voltages are present both on the input
		and output. Otherwise replace.
		Check that the phases in it are present both on the
	Contactor	input and output, that it is not jammed, that it closes
		when powered and that it is not causing short circuits.
Spindle motor will not		Change if any of these problems are found.
turn		Make sure it is closed, ie check that the phases are
		present in input and output that it is not causing short
	Thermal relay	circuits and responds when the reset coil is closed. If it
		has tripped to protect the motor, check the amperage
		setting, reset, and check the motor. Change if
		necessary.
		Check that it has not burnt out, that it turns freely and
	Motor	that there is no moisture in the connection terminal
		board box. The winding can be rewound or replaced.
	Cutting Vise Valve	Make sure the valve is operating correctly, replace if
For SX version: Cutting		necessary.
vise will not close or will	Compressed air supply hose	Check that air is not leaking through the cylinder seals.
not open
	Vise cylinder	Check the hose is not kinked or blocked. Remove the
		obstruction. Replace cylinder or cylinder seals

Parts

Ordering Replacement Parts

To order parts or reach our service department, call 1-800-274-6848 between 7:30am and 5:30pm (CST), Monday through Friday. Having the Model Number and Serial Number of your machine available when you call will allow us to serve you quickly and accurately.

19