GENERAL SAFETY RULES — FOR ALL BATTERY OPERATED TOOLS
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
3.Keep bystanders, children, and visitors away while operat- ing a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Pro- vide barriers or shields as needed.
ELECTRICAL SAFETY
4.Do not abuse the cord. Never use the cord to carry the tool. Keep cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords immediately. Damaged cords may cre- ate a fire.
5.A battery operated tool with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery.
6.Use battery operated tool only with specifically designated battery pack. Use of any other batteries may create a risk of fire.
12.Use safety equipment. Always wear eye protection. Dust mask,
TOOL USE AND CARE
13.Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.
14.Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.
15.Do not use tool if switch does not turn it on or off. A tool that cannot be controlled with the switch is dangerous and must be re- paired.
16.Disconnect battery pack from tool or place the switch in the locked or off position before making any adjustments, chang- ing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.
17.Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.
18.When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns, or a fire.
PERSONAL SAFETY
7.Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A mo- ment of inattention while operating power tools may result in serious personal injury.
8.Dress properly. Do not wear loose clothing or jewelry. Con- tain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
9.Avoid accidental starting. Be sure switch is in the locked or off position before inserting battery pack. Carrying tools with your finger on the switch or inserting the battery pack into a tool with the switch on invites accidents.
10.Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.
11.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enable better control of the tool in unex- pected situations.
19.Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edge are less likely to bind and are easier to control.
20.Check for misalignment or binding of moving parts, break- age of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. Do not use a damaged tool. Tag damaged tools “Do not use” until repaired.
21.Use only accessories that are recommended by the manu- facturer for your model. Accessories that may be suitable for one tool may create a risk of injury when used on another tool.
SERVICE
22.Tool service must be performed only by qualified repair per- sonnel. Service or maintenance performed by unqualified personnel may result in a risk of injury.
23.When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instruc- tions may create a risk of shock or injury.
SPECIFIC SAFETY RULES
1.Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.
2.Keep hands away from all cutting edges and moving parts.
3.Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE Service facility for a free replacement.
4.Wear ear protectors when using the tool for extended periods. Prolonged exposure to high intensity noise can cause hearing loss.
page 2