Installation, Select the Best Location | Friedrich KP05A10 KP06A10

3. INSTALLATION

This air conditioner is designed with a button-down chassis so it can be easily installed in a window.

3.1 SELECT THE BEST LOCATION

1.To prevent vibration and noise, make sure the unit is installed securely and firmly.

2.Install the unit where the sun does not shine directly on the unit.

3.The outside of the cabinet must extend outward for at least 10" and there should be no obstacles, such as a fence or wall, within 20" from the back of the cabinet because it will prevent heat radiation of the condenser. Restriction of outside air will greatly reduce the cooling efficiency of the air conditioner.

CAUTION

All side louvers of the cabinet must remain exposed on the outdside of the structure.

4.Install the unit slanted slightly so the back is slight- ly lower than the front (about 1/4"). This will force condensed water to the outside.

5.Install the unit with the bottom about 30"~60" above the floor level.

INSIDE OUTSIDE

FENCE

	AWNING
COOLED AIR	HEAT
	HEAT
	RADIATION
60"	ABOUT 1/4 "
30"-	Over 20"
	Over 20"
Figure 22

3.2 HOW TO INSTALL

3.2.1 WINDOW REQUIREMENTS

NOTE: All supporting parts should be secured to firm wood, masonry, or metal.

1.This unit is designed for installation in standard dou- ble hung windows with actual opening widths of 22" to 36". The upper and lower sash must open sufficiently

to allow a clear vertical opening of 13" from the bot- tom of the sash to the window stool.

2.If storm window presents interference, fasten a 2" wide wood strip to the inner window sill across the full width of the sill. The wood strip should be thick enough to raise the height of the window sill so that the unit can be installed without interference by the storm window frame. See Figure. 24. Top of wood strip should be approximately 3/4" higher than the storm window frame (STORM WINDOW FRAME) or wood strip (OUTDOORS) to help condensation to drain properly to the outside.

3.Install a second wood strip (approximately 6" long by 11/2" wide and same thickness as first strip) in the cen- ter of the outer sill flush against the back off the inner sill. This will raise the L bracket as shown Figure. 24.

4.If the distance between STORM WINDOW FRAME and WOOD STRIP MOUNTED ON TOP OF INNER SILL is more than 1", two of wood strip are not neces- sary.

—12—

INNER

SILL

OUTER

SILL

INDOORSOUTDOORS

Figure 23

WOOD STRIP MOUNTED	1" MAX.
ON TOP OF INNER SILL	3/4"
	CLEARANCE
	STORM
INNER	WINDOW
INNER	FRAME
SILL
WOOD STRIP
FOR L BRACKET
	OUTER
	SILL
INDOORS	OUTDOORS

Figure 24

KP05A10 KP06A10 specifications

The Friedrich KP05A10 and KP06A10 are advanced air conditioning units designed for both residential and commercial use, providing efficient cooling solutions that meet modern comfort demands. These models stand out for their cutting-edge technologies, robust features, and energy efficiency, catering to various user needs.

One of the main features of the KP05A10 and KP06A10 is their inverter technology. This innovative system adjusts the compressor speed based on the cooling requirement, which not only enhances comfort by maintaining a consistent temperature but also significantly reduces energy consumption. By operating more efficiently at varying loads, these air conditioners can achieve a higher seasonal energy efficiency ratio (SEER), making them an excellent choice for environmentally-conscious consumers.

Additionally, both units are equipped with a multi-stage filtration system. This feature ensures that the air circulated within the space is clean and free from allergens, dust, and pollutants. The filters are easy to access and maintain, promoting a healthier indoor environment for occupants. The KP05A10 and KP06A10 also come with a dehumidification mode, which effectively reduces humidity levels without overcooling the area, making it ideal for humid climates.

The design of these air conditioning units embraces modern aesthetics, featuring a sleek and compact exterior that can seamlessly blend into various interior decors. The user-friendly interface and remote control further enhance the user experience, allowing for easy temperature adjustments and mode selections from a distance.

Operationally, the KP05A10 and KP06A10 are known for their quiet performance. Equipped with sound-dampening technology, these models operate at low decibel levels, ensuring a peaceful environment. Moreover, the units boast a durable construction, ensuring longevity and reliability, which translates to fewer maintenance needs and operational disruptions.

In terms of installation, the Friedrich KP05A10 and KP06A10 offer versatility, with options for both window and wall installations. This flexibility allows consumers to select the best arrangement for their space without compromising on performance.

Overall, the Friedrich KP05A10 and KP06A10 air conditioning units exemplify a commitment to quality, efficiency, and comfort. With their modern technologies and thoughtful features, they are well-suited for diverse applications, providing effective cooling solutions for homes and businesses alike.