Friedrich KP05A10 KP06A10 Locations of Controls, Safety Precautions, Insulation Resistance Test

Page 4

1.3 LOCATIONS OF CONTROLS

1

2

3

4

6

Power

Temp

5

5

1TEMPERATURE SETTING

•These buttons control the temperature of the room.

The temperature can be set within a range of 60° F to 86° F, in increments of 1° F.

2MONEY SAVER

The fan stops when the compressor stops cooling.

•Approximately every 3 minutes the fan will turn on and sample the room air to determine if more cooling is needed.

3OPERATION MODE SELECTOR

•Everytime you push this button, it will rotate between the COOL, FAN and DRY modes.

4ON/OFF TIMER

ON–When the air conditioner is off, it can be set to automatically

come on in 1 to 12 hours from its previous setting. Each touch will increase the timer by 1 hour.

OFF–When the air conditioner is on, it can be set to automatically

turn off in 1 to 12 hours. Each touch will increase the timer by 1 hour. After the timer has been on for 30 minutes, the temperature will automatically rise 2° F, and after another 30 minutes, it will automatically rise 2° F again. The temperature will then stay the same until the timer goes OFF.

To cancel the timer, press the TIMER pad until the display time disappears.

Fan Speed

Timer Mode

4

Money

Saver

2

1

6

3

5POWER

•To turn the unit ON, push the button. To turn the unit OFF, push the button again.

•This button takes priority over any other buttons.

•When you first turn it on, the unit is on the High cool mode and the temp. at 72° F

6FAN SPEED

•Everytime you push this button it will rotate between the following fan speeds: High (F3) → Low(F1) → Medium (F2) → High (F3)

How to Insert Batteries

1.Remove the cover from the back of the remote controller

2.Insert two batteries.

•Be sure that the (+) and (-) directions are correct.

•Be sure that both batteries are new.

3.Re-attach the cover.

•Do not use rechargeable batteries. Such batteries

differ from standard dry cells in shape, dimensions, and performance.

•Remove the batteries from the remote controller if the air conditioner is not going to be used for an extended length of time.

1.4 SAFETY PRECAUTIONS

1.When servicing, set the ROTARY SWITCH to Off and unplug the power cord.

2.Observe the original lead dress.

If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit.

3.After servicing, make an insulation resistance test to prevent the customer from being exposed to shock hazards.

—4—

1.5 INSULATION RESISTANCE TEST

1.Unplug the power cord and connect a jumper between 2 pins (black and white).

2.The grounding conductor (green or green and yellow) is to be open.

3.Measure the resistance value with an ohm meter between the jumpered lead and each exposed metallic part on the equip- ment at all position [except Off] of the ROTARY SWITCH.

4.The value should be over 1 MΩ .

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Room Air Conditioner Service and Parts Manual KP Line Contents Features SpecificationsPreface ModelsLocations of Controls Safety PrecautionsInsulation Resistance Test Disassembly Instructions Mechanical PartsFront Grille CabinetAIR Guide Upper AIR Handling PartsORIFICE, Turbo FAN and FAN AIR Guide Electrical PartsOverload Protector Compressor CapacitorThermistor Control PanelRefrigerant Cycle Power CordCondenser Evaporator Capillary TubePulling Vacuum Installation HOW to InstallSelect the Best Location Window RequirementsBefore Installation NOW Start InstallationLocating Unit in Window Attach L BracketSecure the Guide Panels Install the Sash Seal and Sash LockOutside Electrical Data Troubleshooting GuideUSE of Extension Cords Piping System Condenser CoilsTroubleshooting Guide Unit is running but cooling is ineffectiveFails to Start Room AIR Conditioner Voltage Limits Complaint Cause RemedyReplace if open. If the compressor temperature is Complaint Cause Remedy Circuit Diagram Description QTYExploded View W0CZZService Parts List Description Friedrich Part noMemo Memo Use Factory Certified Parts

KP05A10 KP06A10 specifications

The Friedrich KP05A10 and KP06A10 are advanced air conditioning units designed for both residential and commercial use, providing efficient cooling solutions that meet modern comfort demands. These models stand out for their cutting-edge technologies, robust features, and energy efficiency, catering to various user needs.

One of the main features of the KP05A10 and KP06A10 is their inverter technology. This innovative system adjusts the compressor speed based on the cooling requirement, which not only enhances comfort by maintaining a consistent temperature but also significantly reduces energy consumption. By operating more efficiently at varying loads, these air conditioners can achieve a higher seasonal energy efficiency ratio (SEER), making them an excellent choice for environmentally-conscious consumers.

Additionally, both units are equipped with a multi-stage filtration system. This feature ensures that the air circulated within the space is clean and free from allergens, dust, and pollutants. The filters are easy to access and maintain, promoting a healthier indoor environment for occupants. The KP05A10 and KP06A10 also come with a dehumidification mode, which effectively reduces humidity levels without overcooling the area, making it ideal for humid climates.

The design of these air conditioning units embraces modern aesthetics, featuring a sleek and compact exterior that can seamlessly blend into various interior decors. The user-friendly interface and remote control further enhance the user experience, allowing for easy temperature adjustments and mode selections from a distance.

Operationally, the KP05A10 and KP06A10 are known for their quiet performance. Equipped with sound-dampening technology, these models operate at low decibel levels, ensuring a peaceful environment. Moreover, the units boast a durable construction, ensuring longevity and reliability, which translates to fewer maintenance needs and operational disruptions.

In terms of installation, the Friedrich KP05A10 and KP06A10 offer versatility, with options for both window and wall installations. This flexibility allows consumers to select the best arrangement for their space without compromising on performance.

Overall, the Friedrich KP05A10 and KP06A10 air conditioning units exemplify a commitment to quality, efficiency, and comfort. With their modern technologies and thoughtful features, they are well-suited for diverse applications, providing effective cooling solutions for homes and businesses alike.
Top Page Image Contents