Friedrich KP05A10 KP06A10 manual Refrigerant Cycle, Power Cord, Condenser

Page 9

2.3.6 POWER CORD

1.Disconnect the unit from source of power.

2.Remove the front grille. (Refer to Section 2.1.1)

3.Remove the cabinet. (Refer to Section 2.1.2)

4.Remove a screw that secures control board to base pan. (Refer to Section 2.1.3)

5.Pulls the control board toward you.

6.Disconnect the 2 receptacles and remove the grounding screw.

7.Remove a screw securing the clip with cord to the control board.

8.Pull the power cord.

9.Re-install by referring to procedures above.

2.4 REFRIGERANT CYCLE

2.4.1 CONDENSER

1.Remove the cabinet. (Refer to Section 2.1.2)

2.Discharge the refrigerant by using a refrigerant recovery system.

3.Remove the air guide. (Refer to Section 2.2.1)

4.Remove 2 screws which fasten the condenser.

5.After discharging the refrigerant completely, unbraze the interconnecting tube at the condenser connections.

6.Remove the condenser.

7.Re-install by referring to the procedures above.

Figure 18

Figure19

— 9—

Image 9

Contents Room Air Conditioner Service and Parts Manual KP Line Contents Specifications FeaturesPreface ModelsSafety Precautions Locations of ControlsInsulation Resistance Test Mechanical Parts Disassembly InstructionsFront Grille CabinetAIR Handling Parts AIR Guide UpperORIFICE, Turbo FAN and FAN Electrical Parts AIR GuideOverload Protector Capacitor CompressorThermistor Control PanelPower Cord Refrigerant CycleCondenser Capillary Tube EvaporatorPulling Vacuum HOW to Install InstallationSelect the Best Location Window RequirementsNOW Start Installation Before InstallationLocating Unit in Window Attach L BracketInstall the Sash Seal and Sash Lock Secure the Guide PanelsOutside Troubleshooting Guide Electrical DataUSE of Extension Cords Condenser Coils Piping SystemUnit is running but cooling is ineffective Troubleshooting GuideFails to Start Complaint Cause Remedy Room AIR Conditioner Voltage LimitsReplace if open. If the compressor temperature is Complaint Cause Remedy Description QTY Circuit DiagramW0CZZ Exploded ViewDescription Friedrich Part no Service Parts ListMemo Memo Use Factory Certified Parts

KP05A10 KP06A10 specifications

The Friedrich KP05A10 and KP06A10 are advanced air conditioning units designed for both residential and commercial use, providing efficient cooling solutions that meet modern comfort demands. These models stand out for their cutting-edge technologies, robust features, and energy efficiency, catering to various user needs.

One of the main features of the KP05A10 and KP06A10 is their inverter technology. This innovative system adjusts the compressor speed based on the cooling requirement, which not only enhances comfort by maintaining a consistent temperature but also significantly reduces energy consumption. By operating more efficiently at varying loads, these air conditioners can achieve a higher seasonal energy efficiency ratio (SEER), making them an excellent choice for environmentally-conscious consumers.

Additionally, both units are equipped with a multi-stage filtration system. This feature ensures that the air circulated within the space is clean and free from allergens, dust, and pollutants. The filters are easy to access and maintain, promoting a healthier indoor environment for occupants. The KP05A10 and KP06A10 also come with a dehumidification mode, which effectively reduces humidity levels without overcooling the area, making it ideal for humid climates.

The design of these air conditioning units embraces modern aesthetics, featuring a sleek and compact exterior that can seamlessly blend into various interior decors. The user-friendly interface and remote control further enhance the user experience, allowing for easy temperature adjustments and mode selections from a distance.

Operationally, the KP05A10 and KP06A10 are known for their quiet performance. Equipped with sound-dampening technology, these models operate at low decibel levels, ensuring a peaceful environment. Moreover, the units boast a durable construction, ensuring longevity and reliability, which translates to fewer maintenance needs and operational disruptions.

In terms of installation, the Friedrich KP05A10 and KP06A10 offer versatility, with options for both window and wall installations. This flexibility allows consumers to select the best arrangement for their space without compromising on performance.

Overall, the Friedrich KP05A10 and KP06A10 air conditioning units exemplify a commitment to quality, efficiency, and comfort. With their modern technologies and thoughtful features, they are well-suited for diverse applications, providing effective cooling solutions for homes and businesses alike.