Five Year Tool Limited Warranty, Maintenance

Drilling in Wood, Composition Materials and Plastic

When drilling in wood, composition materials and plastic, start the drill slowly, gradually increasing speed as you drill. When drilling into wood, use wood augers or twist drill bits. Always use sharp bits. When using twist drill

bits, pull the bit out of the hole frequently to clear chips from the bit ﬂutes. To reduce the chance of splintering, back work with a piece of scrap wood. Select low speeds for plastics with a low melting point.

FIVE YEAR TOOL LIMITED WARRANTY

Every MILWAUKEE electric power tool (including battery charger) is warranted to the original purchaser only to be free from defects in material and workmanship. Subject to certain excep- tions, MILWAUKEE will repair or replace any part on a electric power tool which, after examina- tion, is determined by MILWAUKEE to be defective in material or workmanship for a period of ﬁve (5) years* after the date of purchase. Return the electric power tool and a copy of proof of purchase to a MILWAUKEE factory Service/Sales Support Branch location or MILWAUKEE

MAINTENANCE

Authorized Service Station, freight prepaid and insured, are requested for this warranty to be effective. This warranty does not apply to damage that MILWAUKEE determines to be from

WARNING

To reduce the risk of injury, always unplug the charger and remove the battery pack from the charger or tool before performing any maintenance. Never disassem- ble the tool, battery pack or charger. Contact a MILWAUKEE service facil- ity for ALL repairs.

Keep your tool, battery pack and char- ger in good repair by adopting a regular maintenance program. After six months to one year, depending on use, return the tool, battery pack and charger to a MILWAUKEE service facility for:

•Lubrication

•Mechanical inspection and cleaning (gears, spindles, bearings, housing, etc.)

•Electrical inspection (battery pack, charger, motor)

•Testing to assure proper mechanical and electrical operation

Maintaining Tool

If the tool does not start or operate at full pow- er with a fully charged battery pack, clean the contacts on the battery pack. If the tool still does not work properly, return the tool, charger and battery pack, to a MILWAUKEE service facility for repairs.

WARNING

To reduce the risk of personal injury and damage, never immerse your tool, battery pack or charger in liquid or allow a liquid to ﬂow inside them.

Cleaning

Clean dust and debris from charger and tool vents. Keep tool handles clean, dry and free of oil or grease. Use only mild soap and a damp cloth to clean the tool, battery pack and charger since certain cleaning agents and solvents are harmful to plastics and other insulated parts. Some of these include gaso- line, turpentine, lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia and household detergents containing ammonia. Never use ﬂammable or combustible sol- vents around tools.

Repairs

For repairs, return the tool, battery pack and charger to the nearest service center listed on the back cover of this operator's manual.

ACCESSORIES

WARNING

Always remove battery pack before changing or removing accessories. Only use accessories speciﬁcally recommended for this tool. Others may be hazardous.

For a complete listing of accessories refer to your MILWAUKEE Electric Tool catalog or go on-line to www.milwaukeetool.com. To obtain a catalog, contact your local distributor or a service center listed on the back cover of this operator’s manual.

repairs made or attempted by anyone other than MILWAUKEE authorized personnel, misuse, alterations, abuse, normal wear and tear, lack of maintenance, or accidents.

*The warranty period for Hoists (lever, hand chain, & electric chain hoists), all Ni-CD battery packs, Work Lights (cordless ﬂashlights), Job Site Radios, and Trade Titan™ Industrial Work Carts is one (1) year from the date of purchase. *The warranty period for Li-Ion battery packs that do not contain V™-technology – 4.0 volts through 18.0 volts - is two (2) years from the date of purchase.

*There is a separate warranty for V™-technology Li-Ion Battery Packs V™18 volts and above that accompany V™-technology cordless power tools:

*Every MILWAUKEE V™-technology Li-Ion Battery Pack 18 volts or above is covered by an initial 1000 Charges/2 Years free replacement warranty. This means that for the earlier of the ﬁrst 1000 charges or two (2) years from the date of purchase/ﬁrst charge, a replacement battery will be provided to the customer for any defective battery free of charge. Thereafter, customers will also receive an additional warranty on a pro rata basis up to the earlier of the ﬁrst 2000 charges or ﬁve (5) Years from the date of purchase/ﬁrst charge. This means that every customer gets an additional 1000 charges or three (3) years of pro rata warranty on the V™-technology Li-Ion Battery Pack 18 volts or above depending upon the amount of use. During this additional warranty period, the customer pays for only the useable service received over and above the ﬁrst 1000 Charges/2 years, based on the date of ﬁrst charge and number of charges found on the battery pack via Milwaukee’s V™-technology Service Reader.

Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE product. However, proof of purchase in the form of a sales receipt or other information deemed sufﬁcient by MILWAUKEE, is requested.

ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DE- SCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LI- ABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CON- DITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL OTHER WARRANTIES.

This warranty applies to product sold in the U.S.A., Canada and Mexico only.

0721-20 specifications

Milwaukee 0721-20 is a powerful rotary hammer drill designed predominantly for professionals in the construction and masonry industries. This tool stands out due to its combination of performance, durability, and advanced technology, making it an excellent choice for heavy-duty applications.

One of the main features of the Milwaukee 0721-20 is its impressive SDS-plus chuck system, which allows for quick and easy bit changes without the need for additional tools. This feature enhances productivity, especially on job sites where efficiency is critical. The rotary hammer is equipped with a 7-amp motor that generates an impact energy of 2.1 Joules, delivering robust performance for drilling into concrete, brick, or other hard materials.

Moreover, the Milwaukee 0721-20 provides users with three modes of operation: rotary hammer, rotation only, and hammer only. This versatility allows users to tailor their approach based on the specific task at hand, whether it's drilling, chipping, or breaking up materials. The ability to switch between modes means that the tool can be utilized for various applications, enhancing its usefulness on the job site.

Another notable characteristic of this rotary hammer drill is its anti-vibration system, which significantly reduces user fatigue during prolonged use. This system is essential for professionals who regularly engage in heavy-duty drilling tasks, as it provides better control and comfort. The lightweight design of the tool also contributes to easier handling, making it suitable for overhead tasks as well.

In addition, the Milwaukee 0721-20 is built with durability in mind, featuring a robust construction that can withstand harsh working conditions. The tool is designed to resist dust and debris, prolonging its lifespan and maintaining performance over time.

The overall design includes ergonomically shaped grips that enhance comfort and provide a secure hold during operation. With a depth gauge included, users can achieve precise results while drilling, ensuring accuracy for various applications.

In summary, the Milwaukee 0721-20 combines power, versatility, and user comfort into a single tool, making it an essential addition to any contractor's arsenal. Its advanced features, impressive technologies, and durable construction position it as a standout choice for rotary hammer tasks in demanding environments.