Lincoln Electric 11572 manual Water passage. Flush the system

Page 27

E-6

TROubLEShOOTING

E-6

 

 

 

 

Observe all Safety Guidelines detailed throughout this manual

 

 

 

 

PRObLEMS

(SYMPTOMS)

POSSIbLE

CAuSE

RECOMMENDED

COuRSE OF ACTION

Engine stops during operation and 1. Overheat of the Engine. the Engine Protection light does turn

on.

Lack of Coolant Supply coolant.

 

Inspect leakage and correct.

 

Loose or slipping fan belt Remove

 

oil, dust, etc. and tighten.

 

Damaged fan belt. Replace.

 

Clogged radiator Flush the radia-

 

tor.

 

Clogged radiator fin. Clean.

 

Dust or scale clogged in the cooling

 

water passage. Flush the system.

 

Faulty function of the thermostat.

 

Inspect or replace thermostat.

 

Lack of lubricating oil. Add oil.

 

Overloading Decrease the load.

 

Faulty Idler/Engine Protection

 

Printed Circuit Board. Replace.

 

2. Loss of Engine Oil Pressure.

 

Lack of engine oil Supply oil up to

 

the specified level.

 

Fault in the Oil Pressure Switch

 

Replace the switch.

 

Oil leakage from the lubricating

 

system Inspect and retighten.

 

Clogged oil filter Replace with new

 

one.

 

Oil too light Drain and refill with

 

proper grade.

 

Faulty Idler/Engine Protection

 

P.C. Board. Replace.

CAuTION

If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.

CLASSIC® 300D PERKINS

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Classic 300 D Perkins California Proposition 65 Warnings SafetyElectric ShOCK can kill ARC Rays can burnFuMES and Gases can be dangerous Welding and CuTTING Sparks can Cause fire or explosion Cylinder may explode if damagedIii Sûreté Pour Soudage a L’Arc PRÉCAuTIONS DE SûretéOn-Line Product Registration Please Examine Carton and Equipment For Damage ImmediatelyTAbLE of Contents TEChNICAL Specifications Classic 300D Perkins InstallationDuPLEx Receptacle and Gfci MODuLE Design FEATuRESRated OuTPuT DuTY Cycle Control PanelTrailer see Optional FEATuRES MAChINE GROuNDINGLift bAIL VEhICLE MOuNTING Polarity Control and CAbLE SIzESFuEL To prevent Electrical Damage when 5INSTALLATIONA-5BATTERY ChARGING To prevent ExPLOSION whenStopping ThE Engine OperationStarting ThE Classic 300D Perkins 404D-22 Diesel Engine Cold WEAThER StartingEngine bREAK-IN Welder OperationIdler Operation Optional FEATuRES Field Installed AccessoriesWire Feed Module K623-1 Magnum 250 Innershield Gun for LN-23P K355-10Gun tube for PipeWelding KP1909-1 BEARINGS MaintenanceSafety PRECAuTIONS General INSTRuCTIONSVent Screw Priming Lever PuRGING AIR from FuEL System Perkins 404D-22 EngineMaintenance Gfci MODuLE Testing and Resetting PROCEDuRE HOW to uSE TROubLEShOOTING GuIDE TROubLEShOOTINGPRObLEMS POSSIbLE CAuSECOuRSE of Action Open Closed Electronic Idler TROubLEShOOTING GuIDEDefective -- Will Not Close Auxiliary Power Load is Turned onContact your local Lincoln Authorized Field Service FacilityWater passage. Flush the system Ing on Faulty light wiring Enhanced Diagram DiagramsDiagrams 23.00 24.00 40.94 37.12Skid 18.50Classic 300D Perkins Classic 300D Perkins Atenção Atenção

11572 specifications

Lincoln Electric 11572 is a high-performance welding machine that has garnered attention in the industry for its reliability and innovative technologies. Primarily designed for MIG welding, this unit stands out due to its combination of portability, ease of use, and superior welding capabilities. It caters to both professional welders and DIY enthusiasts, making it a versatile option for a variety of welding tasks.

One of the key features of the Lincoln Electric 11572 is its compact design. Weighing in at just over 30 pounds, it is lightweight enough for easy transportation, allowing users to take it to job sites or different workshop locations without hassle. Despite its portable nature, it does not compromise on performance, providing a robust output that is capable of handling a range of materials, including mild steel, stainless steel, and aluminum.

The machine is equipped with a variable voltage control, which allows users to adjust the output to suit different welding thicknesses and types. This flexibility aids in achieving optimal welds, ensuring a good balance between penetration and bead aesthetics. Furthermore, the Lincoln Electric 11572 features a built-in contactor safety switch which enhances user safety by preventing wire feeding when the torch trigger is not activated.

Technology plays a vital role in the Lincoln Electric 11572’s performance. The unit utilizes the company's proprietary welding technology, which ensures a stable arc and reduces spatter for cleaner welds. The efficient wire feed system works seamlessly to maintain a smooth and consistent feed, reducing the risk of jams and enhancing overall productivity.

Additionally, the machine comes equipped with a user-friendly interface, including easy-to-read settings and controls. This makes it accessible for welders of all skill levels, from beginners to experienced professionals. The welder's versatility is further amplified by its ability to handle gas or gasless welding, depending on the user's preference and project requirements.

In conclusion, the Lincoln Electric 11572 is a dependable solid MIG welder that offers a blend of portability, safety, and advanced welding technology. Its robust features and user-centric design make it an excellent choice for a wide range of applications, enabling users to achieve high-quality results with ease. Whether for industrial use or personal projects, this welding machine promises to deliver performance that meets and exceeds expectations.
Top Page Image Contents