Accessories

C-1	ACCESSORIES	C-1

OPTIONAL FEATuRES (Field Installed)

GENERAL OPTIONS

WARNING

Pipe Thawing with an arc welder can cause fire, explosion, damage to electric wiring or to the arc welder if done improperly. The use of an arc welder for pipe thawing is not approved by the CSA, nor is it recommended or supported by Lincoln Electric.

------------------------------------------------------------------------

Power Plug Kit K802D

A power plug kit for the auxiliary power receptacles is available. (Provides a plug for each receptacle.)

Spark Arrestor Kit K903-1

Includes a heavy gage steel, approved spark arrestor, clamp and adapter for mounting to the muffler exhaust pipe.

TRAILER K953-1

Two-wheeled trailer with optional fender and light package. For highway use, consult applicable federal, state, and local laws regarding possible additional requirements. There is a choice of 2 hitches, a fender & a light package.

ball hitch K958-1 Lunette Eye hitch K958-2 Fender & Light Kit K959-1 Cable Rack K965-1

Service Indicator Kit K1858-1

Provides a GO / NO-GO visual indication of air clean- er element useful service life. Filter service based on restriction readings allows the longest life possible from the filter and best engine protection.

STICK OPTIONS

ACCESSORY SET K704

Includes 35 feet (10 m) of electrode cable and 30 feet (9 m) of work cable, headshield, work clamp and elec- trode holder. Cable is rated at 500 amps, 60% duty cycle.

Remote Control Kit K924-5

Contains remote control rheostat and 100 ft. (30.5 m) cable for adjusting the OCV at the welding site.

TIG OPTIONS

TIG Module K930-2

Provides high frequency and shielding gas control for AC and DC GTAW (TIG) welding applications. Its compact case is designed for easy carrying, complete with a handle. High frequency bypass is built in. Additionally, the K936-3 control cable is required if remote control is used. If remote control is not used the K936-4 control cable is required.

PTA-26V TIG Torch K1783-9

Air cooled 200 amp torch equipped with valve for gas flow control. 25Ft. length.

Magnum Parts Kit For PTA-26V TIG Torch KP509

Control Cable K936-4 (required for TIG Module) Control cable for connecting the K930-2 TIG Module.

Arc Start Switch K814 (required for TIG Module) Comes with a 25ft.(7.6m) cable.

Attaches to the TIG torch for convenient finger control.

Contactor Kit K938-1 (required for TIG Module) Provide “Cold” tungsten Tip when welding with the TIG Module.

Control Cable Extension K937-45

Allows the TIG Module to be operated at distances up to 200 ft. from the power source.Available in 45 ft. (13.7m).

Water Valve Kit K844-1

For use with a water-cooled TIG torch. Installs inside TIG Module.

CLASSIC® 300D PERKINS

11572 specifications

Lincoln Electric 11572 is a high-performance welding machine that has garnered attention in the industry for its reliability and innovative technologies. Primarily designed for MIG welding, this unit stands out due to its combination of portability, ease of use, and superior welding capabilities. It caters to both professional welders and DIY enthusiasts, making it a versatile option for a variety of welding tasks.

One of the key features of the Lincoln Electric 11572 is its compact design. Weighing in at just over 30 pounds, it is lightweight enough for easy transportation, allowing users to take it to job sites or different workshop locations without hassle. Despite its portable nature, it does not compromise on performance, providing a robust output that is capable of handling a range of materials, including mild steel, stainless steel, and aluminum.

The machine is equipped with a variable voltage control, which allows users to adjust the output to suit different welding thicknesses and types. This flexibility aids in achieving optimal welds, ensuring a good balance between penetration and bead aesthetics. Furthermore, the Lincoln Electric 11572 features a built-in contactor safety switch which enhances user safety by preventing wire feeding when the torch trigger is not activated.

Technology plays a vital role in the Lincoln Electric 11572’s performance. The unit utilizes the company's proprietary welding technology, which ensures a stable arc and reduces spatter for cleaner welds. The efficient wire feed system works seamlessly to maintain a smooth and consistent feed, reducing the risk of jams and enhancing overall productivity.

Additionally, the machine comes equipped with a user-friendly interface, including easy-to-read settings and controls. This makes it accessible for welders of all skill levels, from beginners to experienced professionals. The welder's versatility is further amplified by its ability to handle gas or gasless welding, depending on the user's preference and project requirements.

In conclusion, the Lincoln Electric 11572 is a dependable solid MIG welder that offers a blend of portability, safety, and advanced welding technology. Its robust features and user-centric design make it an excellent choice for a wide range of applications, enabling users to achieve high-quality results with ease. Whether for industrial use or personal projects, this welding machine promises to deliver performance that meets and exceeds expectations.